Mini Refrigerator Door Shelf Bar Replacement

The door really closes like a refrigerator, has a good seal. The glass door is strong and the operation of the humidity control is absolutely silent. In approximately 2-3 hours reaches the control of 40%�humidity with 1% oscillation only. Internal space totally free without technical cabinet artifacts.

I love Delta 100 and buying in this quantity is a great deal. I have a little bar refrigerator that I use to store film (and gin) so buying a box of 100 is no big deal. If you shoot Delta, this is the best way to buy it.

our refrigerator is covered with them!

The replacement door fit perfectly and was exactly what we needed.

This clamp can hold a 580EX II wherever you want, like in a door, a desk, a chair, a pipe, a shelf... It stays in the position you left it and you don't have to adjust it all the time. I use it to hold a 580EX II controlled by another one in my 50D

All too often when a replacement part is ordered from a refrigerator water filter to electronic components, a cheap knock-off item is substituted. But this item is the real McCoy and is true quality.

When I was shopping for a dry cabinet, I looked at a few options, and decided to get this one. So far, its been good but not perfect. It keeps dry even if you unplug it a few hours. It feels solid, and its made of 1 mm thick powder-coated steel including the shelf. The hinges and shelf clips are 2 mm thick powder-coated steel. It makes a solid sound if you knock on it, and the door sounds like opening and closing a nice refrigerator. Out of the box, the handle comes on the inside of the door, so you have to take it off and mount it on the outside. You get two pieces of precisely cut open cell foam. One is sized for the bottom, and one is sized for the shelf. It runs off a small power brick with an L-shaped barrel connector that plugs into the back of the cabinet and puts out 5 volts 2.0 A, so its basically like a small iPad charger. The dehumidifying unit is on the upper center, and there is a cable neatly routed above the shelf rails to the control board in the front of the cabinet. Theres a single light bar on the front right that illuminates the interior. Its daylight white and a good brightness. It plugs into the control panel and you can turn it on or off from there. The screen on the control panel is easy to read with large letters, and you can adjust the display brightness between bright and dim. The controls arent the most intuitive, but once you read the instructions, its easy to use. The only complaints I have about this cabinet have to do with the lock which I dont use and the shelf placement. You cannot place the shelf in the center of the cabinet if you want to use the lock. In the lower position, the door will not close because the lock will hit the shelf. In the other position, the shelf prevents the lock from turning. The keys are really cheaply made and are probably stamped instead of cut, and they are quite roughly made with cheap-feeling plastic heads. In some upper positions, the dehumidifying unit also interferes with the shelf.

This sub-mini is used in conjunction with the Gen2 sound bar

Perfect for when you smash your flash tube into a door jam and need a replacement!

This sub mini was added to a Beam sound bar to provide more depth to the sound for a home theatre in a small room. Even though the Sub Mini is a small package, it packs a big punch that fills the room. Although the Beam produces sufficient bass for the small room, the Sub Mini takes it to another level. Highly recommend this sub for any size system.