Mounting Radar Detector Bmw Rear View Mirror

Takes the RAM mount to a new level of convenience! I may use this for a radar detector mount as well.

I use this ram mount on my 2019 k1600b to hold My radar detector.

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

This is BMW from Germany for$ :)

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

Excellent, it fits my bmw's handlebar just perfect.

This works well as a head strap but it also works if you want to use it to wrap around something that may be easily scratched. This could mean the side view mirror of a car or maybe just to wrap around your pet. Over all, this product is one to have handy.

This rear cam is small enough to not interfere with your view out your back window. The picture quality is great!!!

Love this remote. With it, plus mirror locking, I am taking sharp photos without vidration at all (tripod mounting of course). Real handy and make a difference.

Got this for my Tele Vue TV85. It's basically plug and play - it bolts directly onto the scope mounting ring with supplied machine screws. Instructions on mounting and use are very clear and straightforward. Not shown on the photo is the light module at the mirror end. When turned on, it shows a blinking red alignment dot (which can be adjusted for intensity/brightness by the rotary on-off switch). Either by looking from the mirror end (mirror folded down) through the lens barrel or flipping up the mirror and looking at it at a 45-90 degree angle from the scope axis, all you do is align the blinking red dot with your target object (star, planet, terrestrial object) and, bingo, your scope is aligned with your intended viewing object. I've not closely checked the Starbeam-scope alignment yet, but there are adjustment screws in the device to center the Finderscope/red dot precisely on where your telescope is pointed/on your intended target. That said, out of the box and mounted on my TV85, the Starbeam's alignment appears to be essentially on target - i.e. it's aligned with the scope right out of the box. I'd assess this is a must have accessory if you want to cut down search times (and frustration) trying to align your telescope with your intended viewing object. A little pricey on the surface, this is a precision-machined device that functions as intended - worth every penny.