Nec Projector Screen Not Square

This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting.

I have about a 17 ft square family room with windows and ceiling ductwork. I needed something very bright so my wife would sit with me watching movies or (more importantly) my hockey games. She refuses to sit in the dark, and has to be able to read her magazines. The very short throw table top projector with 2300 lumens on a 109 1.1 gain screen works great. Sitting 15 ft from the screen means I don't need 1080p for a clear picture. I never use the bright setting, as the color gets too muddy, and it should make the lamp last longer. The lack of adjustments mean you really would not want to put it in a fixed position from a ceiling mount. Small movement is a big change in the picture. And as it ships inside a backpack, it really is portable so I will be taking it to my remote cabin. The screen and projector set me back about a quarter of the price of the 61 sony rear projection 275 lb system I bought in 1999 that this replaces.

Bought this as a replacement part for a NEC projector. Fixed our problem but no thanks to NEC

Mounted NEC NP510 3000 lumens 6lb projector perfectly!

Ordered and received this NEC projector replacement lamp within a week. This is the actual warrantied NEC replacement lamp and filter. Not one of the thousands of OEM copies on the market. Works perfect!

This is a genuine OEM package of an NEC lamp and filters. To save money, I originally purchased a 3rd party replacement lamp at less than half the price, and it seemed fine (if a little dim). Just how dim became ridiculously apparent when I happened to use a 2200-lumen projector which blew away the alleged 5000-lumen 3rd party bulb in brightness! Forget buying a cheap bulb -- if you bought a 5000-lumen projector, get the display you paid for with a genuine NEC bulb.

Using this with NEC NP-M352WS 3500-Lumen Portable Short Throw DLP Projector. Powerpoint slides are about 1 second delayed. No audio via the wireless adapter. However, I am happy with the device for my purposes. I also use a hard wire for audio/video usage. After the second round of ordering, receiving, and returning the first order of the projector and this adapter, an with level II NEC tech support, I am finally able to get the devices to work together. Also, I am not going to be using this on a wireless network/router, but through the Easy Connection option (no router present at installation). It came down to one simple operation (from Mac OS 6.8): Before starting the process below, you will need to get the wireless IP address of the projector. Mine was 10.0.39.155. -click on the wireless icon at the top of the screen -click on Open Network Preferences -click on Advanced -click on TCP/IP tab -change the Configure IPv4 setting to Manually -change the IPv4 Address: to something close to your video projector's (my instance: 10.0.39.160) -click OK and then Apply Don't forget to reverse this setting when you're done using the wireless adapter in order to connect to the internet normally. Hope this helps.

Can't think of any cons. We use this to hold a NEC projector, it's remote and lens cover so far. Very study. I trust our equipment in it.

Product is used to store and transport a NEC NP4001w Projector. It fits just fine and is very well protected. I have always been happy with pelican products.

I used these lamps to replace the original ones in my NEC projector that is used on a daily basis in my classroom. they were easy to install and work great!