Not Sticking To Some Parts Of Print Bed

[This review was collected as part of a promotion.] We started having issues with the toner not sticking to the page and parts of letters were missing. We used this kit to replace the fuser and that fixed the issue.

I've ordered this twice and both times I received it the box it comes in was so beat up that parts were sticking out. The stand itself was not damaged at all, however, which says something about its quality. It feels well made and looks professional. I would buy this again but I'm worried I won't get so lucky with shipping next time.

This is great for a glossy print that I had to send out to a friend. To keep it from sticking to the glossy print, I used tissue paper to wrap the print and then it slid easily into the protector

Similar to the Sanken RM-11 rubber mount, but much more technical. Some small parts, but altogether it makes a very sturdy mount - no way to pull the mic out by accident, yes it makes a tiny mic 10x bigger, But that's what you have to do to prevent clothing noise most of the time. Also at $17 it is fairly economical. A must-have for DPA 6060

I have several Portabrace bags for Large & Bulky Items. Some of those have intricate parts (Mics, Lights, Mico Parts). I color code certain cases (Yellow for Audio, Black for General, Blue for Photography) I alway get the Clear Top units and with a Label Machine I can quickly Identify and pull a case from a large case quickly with little chance of any damage to the items inside, after all these are Pelican!

I have the 95mm Freewell VND System. Some of the parts are to big to fit in a 95mm case, so I bought this one. Great case, and it protects everything very well.

A little hard to install. The instructions number the different part, however the actual parts are not numbered. Some trial and error involved on the install. The final product looks good and protects the lens from end to end. Highly recommend.

Very easy to print and makes extremely strong parts

The da Vinci Jr. 1.0 is a great bang for your buck with the decent build size of 6 x 6 x 6 inches and SD card compatibility. I printed out numerous projects so far and the print quality on this machine is fantastic. The only issues with printing is that it sometimes has trouble printing small details. However, this could be improved by changing the print settings in the XYZware, like making the extruder move at a slower rate, which decreases streaking. So, one of the most important features about this printer is its usability. Let me tell you right now, this machine will take you a while to set up properly. There isn't the three-knob calibration print bed that other 3D printers have,for this printer wants to be more approachable by maintaining a fixed, leveled print bed. The only thing you have to do is fix the Z Offset, which is the distance from the extruder nozzle to the print bed. This is the only calibration you have to do but it can be tricky getting it right the first few times. Unfortunately, not all of these printers were made the same, one printer could be printing excellent at .90mm offset, but mine functions the best around 1.65mm offset. This printer does 100 to 400 microns, and the infill and speed are all adjustable in the XYZware. I've printed out some quick decorations for my desk, but I've also spent a few hours printing out this model of the Statue of Liberty at excellent quality (100 microns) and slow speed at a 30% infill. The quality of the model was amazing. Overall, the 3D printer was hard, even frustrating at times to set up properly, but once it gets going it produces some of the best prints I've ever seen.

My first 3D printer and I love it. The instructions are clear and it is easy to assemble out of the box. There are a ton of youtube videos on this printer so this has helped me a lot. What I found most valuable is to make sure you FIRST mechanically flatten the bed and then do the auto-leveling. I do an auto-leveling before each print because every time I remove a previous print I fear it moves the adjustment. Remember we are printing ~0.12-0.2mm layer heights so I think it is important to auto-level each time. It only takes a minute or two. Also do it with the bed and nozzle at the temperature you are going to print at.