Note 4 Micro Usb To Hdmi Cable

I bought this for the Sigma FP. And the first thing you have to know is, the cable that comes with it does not fit the FP. You have to buy a cable separately that is HDMI normal at one end, and the micro HDMI at the other, which looks a lot like the old standard USB mini (not micro USB) Once I had the right cable I took it out at night in the snow and it was exceptional compared to the screen on the camera itself. As much as I am loving the Sigma, I find in video and at night it often does not represent the colours correctly on its own screen, although the footage looks great on the computer. But with this extra bright screen, you get the focus lines and accurate colours (more accurate at the very least) and you can stand away from the camera and still use onscreen menus like focus lines. Although I haven't tried the other menu items like level etc. Overall for this price its a fantastic addition to a rig.

Note that while the pass-through HDMI port will support 4K, the USB signal provided to your computer is only max 1080p. It's perfect for my needs, but if you need 4k on your computer then look for a different device. The 1080p is perfect with no artifacts or other glitches. Highly recommended.

Needed this for charging from a micro-USB cable. Works great for that.

Perfect for what it does... allows for a micro HDMI cable to be used with a gymbal without pulling or causing undue stress on the device.

After breaking my Micro HDMI connector I purchased the cable Clamp. I have not had any issues since.

The main feature of this cable is that it is very thin. This reason alone makes it invaluable when wanting to reduce the appearance of cables and for keeping the weight and space in my bags to a minimum. Take note that this hdmi cable is directional. Each end on the hdmi note the 'source' or 'display'. [I have received this product in exchange for my honest review]

I've only used it for a short while but so far I have nothing negative to say about it. It charged my Samsung Note 5 from very low (4%) to full in about an hour and there were still 3 lights remaining (about 75% capacity). It's a little heavier than I expected or would prefer but that's not too big a deal. The attached cords are a nice touch and there's also no need to turn it on. Just plug it into your device and it starts charging. Easy Peasy!

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Great little box once understood what it does NOT do. This should be called Decimator MD-LX HDMI/SDI Pass Through Converter. Replaces BMD Micro converters. Passes 2 channel audio, by default. Can be configured to pass 8 channel audio. Max Channels for HDMI. Cannot reassign audio channels, just pass them through. All connections are Active, also be default. Defaults to SMPTE Level A. Can be changed from software Control Panel. Download from Decimator website. Whatever signal comes in, stays same going out. Works up to 1080p60. All connections are active. LED Light on each end identifies Input. EX SDI Input or HDMI Input. See Legend on Device. Simple! Informal testing indicated audio is clear. No static! Better to own one of these than 1 each of BMD Micro Converters. Unless you need both at same time, this is still better. Works, out of the box. Can be Powered from USB to PC; USB to Outlet Adapter or... Battery! It's USB Powered! Nice touch! Fragile connection though in a rough environment. Can be Mounted by Micro Clamp to Light Stand. Or use Tether Tools StrapMoore. We use with our ATEM 4K Video Switch for SDI Multiview (SDI to HDMI Monitor) out to 2nd SDI Multiview (SDI to HDMI Monitor). Yes, requires 2 converters for that! And yes, we have the BMD Micro converters. Both of them! Hope this helps!

As we are in the process of moving towards USB C I still have a bunch of regular USB accessories and that one does it ll in one even SD and micro SD. the HDMI is also amazing to connect to an extra monitor. HIGHLY recommend!