Obs Studio Tutorial Record Screen

I bought this to do live streaming and also to be able to record video via OBS. It worked perfectly right out of the box. Of course I am careful to use only quality cables with it. I've streamed/filmed for hours and have not noticed excess heat but I do have it placed where a fan is moving air nearby.

This was super easy and worked right away. Using it to record a professional camera via OBS running on an iMac. Best part is that it captures audio so I can use XLR mics.

I have used this to record several tutorial videos where I am walking around the room. I use it in conjunction with a Rode NTG5 when sitting at my desk. The 32-bit audio means you do not have to worry about levels or clipping. It's truly set-and-forget. I jam-sync the timecode with an UltraSync One, since the Tentacle Sync-E are hard to find. No issues, but you have to power-off the device, plug-in the timecode source, then power-on. It works most times, but occasionally the timecode won't take, and you have to power cycle it again. Once synced, it works flawlessly. I only record for at most two hours, so I haven't tested the limits of it's accuracy. The lav mic quality is not as good as my shotgun (maybe that's expected) but it's still good enough. The mic has a screw-lock, and the cable is extremely long. You can power-off the device, and connect it to the computer. It appears as a drive, so copying data over is also quite easy.

Easy to use and works great. Using this to stream from my GH4 to OBS Studio. Great, simple streaming solution.

Just works. Plugged it into USB3, and the HDMI attached camera simply works everywhere I want to use it, like OBS Studio, Zoom, etc...

First i was a little skeptical of the magewell hdmi adapter, but after a few months of use, it has performed quite well. It does get hot, so i unplug when not in use. The magewell worked well with the native streaming from Youtube and Facebook through the browsers and it also works well OBS studio. The Roland V-1HD is quite simple to use and our operators were able to get to speed with it pretty quickly. My only gripe with the switcher is that it is pretty intolerant of inputs that do not conform to the format it is expecting to receive. Once i found that out, i was able to correct that by ensuring all of my cameras were set to 1080 30P. That ended up forcing an upgrade on an older camera that wasnt able to output 1080 30P. The V-1HD was able to work with that cameras 540P or 1080I outputs, but it required a level of effort that our newer cameras didnt need. In end, we just upgraded the older camera. The V-1HD also has an audio mixer built, but i found the inputs seemed to auto adjust the signal levels despite having a manual adjustment on the side of the switcher. it could have been something within my set up as i had too use a xlr camera adapter to convert the 2 channel xlr input to 3.5MM stereo in order to connect to the Roland. While the audio was acceptable, i resolved this purchasing a Dante AVIO usb adapter and just routing sound independent of the switcher to OBS studio. i still use the native audio from the switcher as a back up feed in OBS.

Works well with my OBS Studio. If you are using Vmix, don't forget to set the video format of the input to MJPG

USE: We run a couple of these cameras in our small (100 ppl) church. The cameras are running via USB (~50ft cable runs) with a USB splitter, and our congregation has been very pleased with the quality of the image for live-streaming. We pre-program scenes for each camera in OBS studio and use our presentation software to trigger MIDI signals which translate to key presses in OBS studio to control which scene/camera is shown, making it extremely operator-friendly. We installed the first of these cameras in 2020 for live-streaming services during the COVID shutdowns and it has worked great for more than a year. Because the automatic settings on the camera are perfect for the sanctuary environment and the pre-programming of our system is already set up, it takes less than 30 minutes to add in an additional camera to expand the system. As the title of this review says, the cameras work so well that we bought another. And we may continue to add more in the future as our church keeps growing.

Plugged it in and it works for OBS Studio streaming, no drivers needed. More importantly, it is working to give a quality 1080p image from a Nikon DSLR through a 50 foot HDMI cable. (A different HDMI capture device would not give a signal for this same combination.) 50 feet is pushing the limits for HDMI, so I'm happy not to need an HDMI extender.

I am using these microphones with OBS Studio software to produce YouTube videos. The setup of the microphones was very intuitive and easy and the OBS software recognized them immediately. The sound quality is quite good and exceeds that of my pair of $800 matched corded microphones.