Optix 4.3 Lcd Widescreen Rear View Mirror

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

We rarely use the rear LCD and use the view finder most of the time. This makes viewing it much easier in bright sunlight and just snaps on to the camera. It will get in the way of your rear LCD. Works with our Sony A77 II. ~photosbymeta

I use this monitor mount to hold two 23.6 widescreen LCD monitors, one in landscape orientation and the other in portrait orientation. The mount has been working very well for me. It was easy to set up right out of the box; just attach a few parts and you're up and running in no time. Really sturdy, too. Very happy with this purchase!

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

Much improved protector. Protects rear LCD display. Great quality!

This 2-pack comes with a piece for the rear LCD, and another for the top LCD. It's a flexible film material similar to other screen protectors out there, but it's noticeably thicker with a glossier surface. Application to my Nikon D750 was easy & took less than 5 minutes. Just follow the included instructions. I used a microfiber cloth & an anti-static screen cleaner like Klear Screen to clean the LCD. After making sure there was no dust, I applied the protector and smoothed it out with a small rubber squeegee. I gave it a couple of hours to settle and that's it. This is the third time I bought this product as the first two worked out well on my Nikon D600 & Panasonic LX100. One year later, they're still clear & show no signs of coming off. I will continue to buy this product.

I like the quality and snug fit on the M10.  I also like the optional flap that covers the rear LCD, both to keep it clean as well as when shooting its less tempting to constantly engage the LCD if it is out of sight, out of mind.

It's made out of plastic if that bothers you. I use my camera's rear LCD monitor constantly for fine manual focusing. I'm grateful to have this product so I use the monitor in the bright sun. The magnification really helps with focusing too.

I have installed many of these protective films from various manufacturers on smart phones and cameras over the years, with very few problems. I could not get the Expert Shield film to lay flat on a Canon EOS 1DK Mk III; there was always a large bubble in one corner. I contacted Expert Shield customer service, and included a photo of the problem. They responded quickly with further suggestions on the installation process, and also sent me another complimentary set of new shields, in two different sizes for the large rear LCD. The larger size shield does fit the 1DX Mk III rear LCD properly, but the tolerances are slim so positioning has to be perfect.  Kudos to Expert Shield for their excellent support!

Product package consists of 2 glass protectors for rear monitor and 2 for top LCD panel. Easy to install using online instructional video. Fits perfectly. Highly recommended.