Panasonic P55 Flashing Usb Driver

i use this with a 2 in 1 tablet computer, very portable. Runs on usb power, flashing LEDs tell you it's connected and talking to your devices. does not seem to lag, works well. fits well in gig bag with keyboard

I was looking for USB to serial adapter which will work under the Windows 7 and this adapter does exactly that. Even better - Windows 7 already has built-in driver for this adapter!

but it is unsettling to have the upstream light flashing

flashing lights indicate charge level roughly.

I needed to replace a Focusrite Scarlette 2i2 that was having driver issues with Windows 11. This Peavey USB-P needs no drivers and has worked flawlessly, so far. My only issue was that it did not include the USB type B cable. I scavenged a cable from a USB-connected printer, until I can purchase a new cable.

After my last mixer turned out to be a disappointment, (having blown a few channels from only two months of use), I was willing to spend whatever it took to find something more reliable and little less noisy. The 12XU was it.Very quiet, or transparent in a well treated room.I really like the one knob compression, (just a little goes a long ways). Even using a pre-amp on the mic was still quiet enough for mixing with background music, (or easily pulled using NR software for solo VO).I like the multiple color scheme that works well in a sea of buttons for quick grabs, (that I don't need to find my glasses to read labels).Lighted Mute buttons that say ON. Nuff said.A PFL switch to listen to channels independently when you're live and can't solo to investigate any issues that may arrise, or to preview a channel before putting it into the mix. I will certain use this one for live event work. It also has a solid build and feel to it.You'll have to download and install a USB driver for PC connectivity, and while it might seem like a minor issue, what you'll get is an ASIO driver to use in your DAW, (zero latency, ASIO features for labptops with non ASIO cards, etc). Nice.While the board is not difficult to use, One caveate is the USB input. It requires input level adjustment via an Attenuator Function, found on pages 22 and 28 of the manual. Read it, or weep.My only gripe was having to provide my own USB Cable. So, you might want to order one with it.

USB 3.0, included USB hub, external powering and complete flexibility for your ports to be in or out, what else could you want? And now they include rack mount ears in a clever arrangement. Finally the best part - make sure to install their custom driver and don't use the default Windows one. That way you get interface multi-client, meaning the driver does not get locked to one client (so you can run multiple applications off the interface at once). Otherwise avoid the MOTU interfaces. I had to junk a MIDI Express XT because their driver (from 2013!) refuses to let a Windows computer sleep. They verified the issue, but yet at the time of this review, many months later, they neglect to fix it. So I had to buy a new interface, but this one is better anyhow.

One day a USB C gen 3 connection failed causing a tethering program to crash as only gen 2 was available. I used this adapter to connect to a USB A gen 3 port to get the job done. It turned out that Microsoft (in their inimitable way) had replaced the manufacturers USB C driver with a generic driver during an update that caused the ASMedia 3142 to provide Gen 2 service only.

After upgrading to Windows 10 my HP computer the built-in sound card stopped working and I couldn't find a driver to work with Windows 10, this small device was simple to install, just plug the device to a USB port and installed it's own driver automatically and it was up and running in no time. I don't mind the device sticking out is just like any USB drive.

No knock on the product, but I had hoped it would connect my USB -B ported laser printer to the USB-C port on my notebook. It's an older printer and the port is USB 2.0 standard. The description for this cable said USB 2.0 so I hoped Windows would recognize the printer. The printer manufacturer (very well known Brand) does not provide a driver for Windows 10, but their Website says Windows 10 comes with a driver for it. This printer worked with my previous Windows 10 notebook via USB, and via ethernet worked with previous Windows versions back to XP. The computer would see the printer and list it's name, but would not install the driver. I tried a few other USB adapters with same problem and no luck. Turns out you need software in addition to hardware to make this conversion. I have since obtained a Startech port adapter for connecting my notebook to dual monitors, mouse, keyboard, ethernet, and the printer all through the notebooks 1 free USB-C port. Had to install drivers for the port adapter first, but now everything is working great. If you have a new printer, with installation software, this cable may work just fine. If your printer is old, you will need a port adapter with software.