Pc Part Picker Case Cpu Cooler Compatibility

I built my PC with this case as livingroom Home theater and for gaming. CPU: AMD RYZEN 5 7600 GPU: XFX Radeon RX 6700 SPEEDSTER SWFT 309 CORE SSD/RAM: 1TB/16GB Motherboard: Gigabyte A620I AX Mini-ITX AM5 Motherboard Cooler: Cooler Master MasterLiquid ML120L V2  PSU: Cooler Master V850 SFX Gold 850W 80 PLUS Gold Modular SFX OS: Linux (Bazzite OS), Widows 10/11 The case instructions were about as clear as Ikea furniture, but manageable and fun to build. Cable management will take some patience. If using an AMD CPU, disable the default overclocking, as it smelled like PC was melting while running at a contstant 95 degrees, regarless of air cooled or liquid cooled. Overall, I'm very happy with the way it turned out. Performance on Windows 10/11 and Linux (Bazzite OS) is great and very similar, with Windows requiring more upfront time to setup with drivers. Cyberpunk 2077 - Ultra settings, consistently over 100 FPS with FSR 2 enabled at 1080p. 60+ FPS at 1440p. Starflied - Ultra Settings, mostly at 70 FPS with FRS 3 enabled at 1080p. I wouldn't recomment 1440p.

First time building my own PC, I used this case with PCpart picker and it fits everything perfectly. It's got a wonderful little back panel section to run wires through a non-visible section of the case that helps make everything inside look nice and pretty. Seems super durable, all the sensitive (glass and plastic) surfaces come with plastic on them to protect them while shipping. Super solid feeling and honestly just feels like a high quality case. Steal of a deal!

This CPU has been great! My little brother and I built his first PC using it and it's worked great! The included cooler adds some great value to the package. The CPU stays pretty cool even under load and I'm very impressed with it. The computer he came from was an old desktop from 2011 so this is a huge upgrade from that. I found out that the CPU also supports FTPM (Firmware Trusted Platform Module) so if you build a PC with it you will be able to use windows 11 when it comes out. Overall couldn't be happier with it!

Mounted it on my CPU cooler as the center piece for my PC and I have got to say, it looks pretty good. Its nearly silent and quite efficient at cooling my pc.

Runs very well and the cpu cooler that comes with it is amazing!

Great CPU but it overheats a lot, definitely need a better cooler.

Ever since top vents started coming into vogue, I've longed for a case like this to make an appearance, and it's everything I wanted. The key differentiator of this case compared to most other, modern cases is that it has no vents on the top. For air cooling, this is ideal because you want air to go through the CPU cooler and out the back, not go out the top and skip the cooler entirely or come in from the top and screw up the flow direction. There is a slope in front of the top-mounted PSU that forces the incoming air from the empty space at the top of the front fans down into the CPU cooler. Then the GPU area is fed by additional fans on the bottom to ensure there's plenty of fresh air. This amount of airflow allows you to run the fans at pretty low speeds, being almost silent at 60% in the front and 40% on the bottom, while not significantly reducing the cooling potential. There are mesh filters in front of both sets of fans, keeping the interior a lot cleaner than it would be without them. The panels pop off nicely with some sort of magnetic or tension mounting. Overall, the design of the toolless access and working inside this case feels like an improvement over the Meshify C case I had before. Of course, there is one compromise. If you want non-nvme drives, it only has room for a couple on the rear of the motherboard panel, and there's not much airflow in that area, so I'd hesitate to use a spinning platter hard drive. At this point, I only use nvme drives and a separate NAS for storing media, so that's no problem for me.

I am new to building PC with aftermarket cooler. Needed a wider case for DeepCool AK 620 which fit just fine. Case is very nice and allows more flexibility than I'm used to for cable routing and storage mounting options. Also mounted an optical drive at bottom front. When I put the magnetic cover over the optical drive it hits the button to open the tray. Not a big deal to me. Had a question about plugging 3 pin case fans into 4 pin connectors on motherboard but Fractal never responded to my ticket. Figured it out on YouTube. Would buy again.

Works great in my system - i will say the cpu cooler that comes with it can be pretty loud but thats the only complaint!

It is a quite and solid built CPU cooler. Easy to install, worked perfectly.