Phone Clip For Microphone Stand

I bought this shockmount for use with Neumann KM184, which are extremely sensitive to movement, shock and vibration even at very low, even almost subsonic frequencies. If I use a conventional mic clip on a stand on stage for example, I get booming footsteps through the stand/clip. I have tried several other rubber-band style mounts, which help slightly, but still not acceptable. This lyre type clip is the best I have tried. Any residual noise is at such low frequency, that I can filter most of it with a highpass at 20 or 30 Hz. But to be truly effective, however, you can not use standard microphone cables (1/4 diameter) because the stiff mic cable puts stress on the lyre and makes it less effective. Moreover, the cable itself conducts mechanical noise to the microphone body. To get the best performance, use a cable made with Mogami 2697 super thin balanced mic cable, make a small loop behind the mic and clip the cable into the strain-relief built-in to the back of this clip. If you have a long mic cable run, just use a 3' pigtail of the thin cable at the mic for this purpose.

This works great and allows me to attach my microphone clip to the boom on my sturdy light stand. The sturdy set up means that the microphone stand will not fall on expensive instruments.

Great microphone stand!

This is a simple microphone stand.

Serves its purpose! Works exactly as described! Just wish it came with a microphone clip.

This microphone help me so much to record direct on my phone.

The Olympus ME-52W Noise Cancellation Microphone adds further versatility to your Olympus Digital Recorder (A WS-321M in my case). The Microphone comes as part of a four piece kit that includes the microphone, a 1m long extension cable, a tie-clip style clothing clip and a foam wind screen that fits over the microphone. The microphone itself is hinged above the 'mic/input' jack on the top of the recorder where it can be adjusted horizontally by rotating it in the jack and vertically through using a hinge incorporated at the microphone's base. This external mic provides far superior clarity and range over the WS-321M built-in microphone! With the microphone inserted directly into the input jack it allows the user to hold the whole unit like a handle with the mic projected unimpeded out of the top. I found the mic very handy during news scrums and while taking personal notes as the risk of covering the recorder's built-in mic is eliminated. The tie-clip mic holder is useful mainly when recording a stationary subject or when recording yourself when you need your hands free. It's very straightforward to use and easy to remove the mic from it quickly. Lastly, the wind screen cap was also surprisingly useful. It really made a difference in sound clarity when recording in windy conditions and recording in a vehicle with the windows open or the top down. All in all this is a very inexpensive purchase considering the value and versatility it adds to your recorder. Really a 'must have' if you're serious about the recordings you make.

Easy to clip on for selfies or shooting video with your phone.

Can also be used as a phone stand

For an inexpensive microphone stand, it seems to be solid.