Poe Home Security Camera Dvr

Great storage for security DVR.

WD Hard Drive Purple installed in a DVR for home security, HD working very cool and with 8 cameras HD 720p & 1080p give me 7 days of continuos recording, very reliable and quiet. Recommended.

I installed each of the 4 SanDisk MAX ENDURANCE memory cards into the POE security cameras for my home. They work great for this demanding almost-always-on recording of high-def video.

I am using this PoE for a home security system with Vivotek IP8335H 720P HD Cameras. It was very esatly to install, just hooked up the network from my 4 port router to port 8 of the switch, and attached my 4 cameras to the 4 ports that supply PoE and off I went!! It has a total of 8 ports, however 1 port must be used to supply the network to the unit, then there are 4 with PoE capability and that leaves 3 regular ethernet ports. Nice switch for the price. So far I havent found any fault with this item.

My Flir DVR Security Camera system had a hard drive failure after several years. I got this as a replacement. Opened DVR Case, unplugged 2 cables on hard drive, removed 4 screws holding the drive, swapped out the old drive for the new and reversed order to put it back together. Formatted drive with DVR and my system is back up and running perfectly now!

I purchased this camera to run on a pc based security system called Bluecherry DVR. I was surprised to find out that a camera costing so little could provide such high quality. The camera was easily recognized by the system and functioned perfectly. The camera is well made and I will be purchasing more GeoVision IP cameras.

Used for POE security cameras, which worked great!

Works great for my Reolink PoE security camera. Output meets its specs and so far no issues. Runs very cool, smaller than usual PoE injectors I have and at an incredible price. Even comes with a wall mount and nice design that looks more like an ikea power adapter than a bulky utilitarian looking. Check if output meets your requirements and buy if yes.

I can't say enough good about this little switch. It offers per power management for data and power use. Yes you can order it to power cycle any particular port to reset those hard to reach AP's or cameras. It measures the PoE consumption of each port as well as the total draw from the PoE uplink. It's sealed against weather and mounts in harsh environments like attics and garages. Integrated into the UI software it's also helpful to track down problems with devices connected through it. If you have a router, you can also run VLANs through it to, for example, tap off a dedicated PoE ethernet line for a security camera and turn it into a general purpose trunk line for regular devices like solar inverters or AP's, and then VLAN the camera port back to the dedicated port on the NVR for added security.

I now own 5 of these camera. I have had excellent satisfaction from all. I use them for wildlife viewing and home security.