Print Glue Stick Heated Bed

Attaches to flash without having to stick or glue anything to to flash head. The attachment opening is just the right size, as is the stretchable strap. It works well as a light modifier and doesn't attract unwanted attention when mounted on the camera.

All 4 x 6 photos fit perfect in the pockets. Glue Stick worked great for larger panorama prints. Nice leather feel and came in a clear plastic book cover. Fast and accurate service. You wont be disappointed. Paul P. Cape Cod

Ive had better luck with this glue that others Ive tried.  For best stick, apply a bit on back of photos, etc. and on surface applying it to.  Easy to apply, doesnt smell.  Good value. I make a memory book of a trip in an old-fashioned scrapbook with photos, brochures, etc. and can then add a script of my trip plus written notes on the pages pointing to special things I want to remember or a personal comment.  The photos are still in place when I revisit the trip later.

This was my first filament ever and it has been the best so far. Prints stick to the bed very easily (I'm using 60C temp for bed) and prints come out outstanding at 0.12mm layer height. Very easy to use, recommended for beginners and experts alike! My favorite filament so far!

Even though i had to print only one side, it worked well on book pages that i sandwished together with yes glue. It was a lot of work but printed so much easier than two-sided paper that wasn't Epson 10 ml. thick.

Protect print while mounting. The underside of my metal straight-edge gets glue, dirt. Place tissue paper over print while cutting matboard.

I print fine photos and then glue either the horizontal or vertical image to good card stock to make photo cards. My 92 year old mother-in-law uses them as currency in her retirement home. My wife uses selected images as her personal stationary. Local scenes from the Gasp are sold in an art based caf. Other images specific to Mtis Gardens are sold in the gift boutique. I like the pearl or lustre finish as it seems to provide great resolution and detail.

The da Vinci Jr. 1.0 is a great bang for your buck with the decent build size of 6 x 6 x 6 inches and SD card compatibility. I printed out numerous projects so far and the print quality on this machine is fantastic. The only issues with printing is that it sometimes has trouble printing small details. However, this could be improved by changing the print settings in the XYZware, like making the extruder move at a slower rate, which decreases streaking. So, one of the most important features about this printer is its usability. Let me tell you right now, this machine will take you a while to set up properly. There isn't the three-knob calibration print bed that other 3D printers have,for this printer wants to be more approachable by maintaining a fixed, leveled print bed. The only thing you have to do is fix the Z Offset, which is the distance from the extruder nozzle to the print bed. This is the only calibration you have to do but it can be tricky getting it right the first few times. Unfortunately, not all of these printers were made the same, one printer could be printing excellent at .90mm offset, but mine functions the best around 1.65mm offset. This printer does 100 to 400 microns, and the infill and speed are all adjustable in the XYZware. I've printed out some quick decorations for my desk, but I've also spent a few hours printing out this model of the Statue of Liberty at excellent quality (100 microns) and slow speed at a 30% infill. The quality of the model was amazing. Overall, the 3D printer was hard, even frustrating at times to set up properly, but once it gets going it produces some of the best prints I've ever seen.

My first 3D printer and I love it. The instructions are clear and it is easy to assemble out of the box. There are a ton of youtube videos on this printer so this has helped me a lot. What I found most valuable is to make sure you FIRST mechanically flatten the bed and then do the auto-leveling. I do an auto-leveling before each print because every time I remove a previous print I fear it moves the adjustment. Remember we are printing ~0.12-0.2mm layer heights so I think it is important to auto-level each time. It only takes a minute or two. Also do it with the bed and nozzle at the temperature you are going to print at.

Very easy setup. Took 10-15 minutes. The magnetic bed it has is awesome. Just flick the print once its cool and comes right off. Print quality is nice and faster than what i had. Mine came with the camera , which is less trips to the workshop. Creality cloud is nice can slice and upload remotely and even start a print from my phone. Lastly the auto off function is nice for those prints that finish overnight or while i am away. Love it worth every cent