Projector For 40 Foot Screen

Screen is being used in a 40 x 40 foot room with a 7.2 theater system. The projection screen is over the stage and is long enough to extend down and up out of the way when not in use. If the light were not in the way, I could have moved the screen even higher.

We use this projector screen in our church activities.

I installed them next to my projector screen and they sound great.

Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

Mounting a projector from a ballroom ceiling with a 4-6 foot extension. This is the second purchase of its kind and I will be ordering more.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

I needed a new bulb for my vintage (40+ yrs) Kodak Carousel 760H projector as the one in the device expired in less than 2 hrs. of use. It had not been used since about 1983 and I was concerned that perhaps this legacy bulb was no longer available. B&H to the rescue with this replacement that was just what the owner's guide spec'd. I resumed my project I observed a better quality of image on the screen and the heat generated by the new bulb was noticeably cooler! 2.75 hrs. total use so far.

Used to run a 40' hdmi line that was dropping out. This solved the problem and now the projector will pick up hdmi input. Absolutely no loss of signal at all.

Great projector at a 8 foot throw. Games look crisp, it isn't loud, and setting up and look of the unit is modern.