Prusa Mk3 Layers Not Sticking To Print Bed

It made much easier to print ABS and Nylon. I own a creality and 3 prusa which I use for PLA prototypes, and I was looking for a higher end printer for final parts and dual printing. Definitely the best cost-benefit relation for my needs as it supports many materials. One E3D teflon nozzle is for PLA and the other E3Dnozzle is all metal. Decent printing area. Cloud is useful to manage and monitor prints.

This is great for a glossy print that I had to send out to a friend. To keep it from sticking to the glossy print, I used tissue paper to wrap the print and then it slid easily into the protector

The da Vinci Jr. 1.0 is a great bang for your buck with the decent build size of 6 x 6 x 6 inches and SD card compatibility. I printed out numerous projects so far and the print quality on this machine is fantastic. The only issues with printing is that it sometimes has trouble printing small details. However, this could be improved by changing the print settings in the XYZware, like making the extruder move at a slower rate, which decreases streaking. So, one of the most important features about this printer is its usability. Let me tell you right now, this machine will take you a while to set up properly. There isn't the three-knob calibration print bed that other 3D printers have,for this printer wants to be more approachable by maintaining a fixed, leveled print bed. The only thing you have to do is fix the Z Offset, which is the distance from the extruder nozzle to the print bed. This is the only calibration you have to do but it can be tricky getting it right the first few times. Unfortunately, not all of these printers were made the same, one printer could be printing excellent at .90mm offset, but mine functions the best around 1.65mm offset. This printer does 100 to 400 microns, and the infill and speed are all adjustable in the XYZware. I've printed out some quick decorations for my desk, but I've also spent a few hours printing out this model of the Statue of Liberty at excellent quality (100 microns) and slow speed at a 30% infill. The quality of the model was amazing. Overall, the 3D printer was hard, even frustrating at times to set up properly, but once it gets going it produces some of the best prints I've ever seen.

My first 3D printer and I love it. The instructions are clear and it is easy to assemble out of the box. There are a ton of youtube videos on this printer so this has helped me a lot. What I found most valuable is to make sure you FIRST mechanically flatten the bed and then do the auto-leveling. I do an auto-leveling before each print because every time I remove a previous print I fear it moves the adjustment. Remember we are printing ~0.12-0.2mm layer heights so I think it is important to auto-level each time. It only takes a minute or two. Also do it with the bed and nozzle at the temperature you are going to print at.

Very easy setup. Took 10-15 minutes. The magnetic bed it has is awesome. Just flick the print once its cool and comes right off. Print quality is nice and faster than what i had. Mine came with the camera , which is less trips to the workshop. Creality cloud is nice can slice and upload remotely and even start a print from my phone. Lastly the auto off function is nice for those prints that finish overnight or while i am away. Love it worth every cent

This is amazing, and is much lighter from MK3 grip.

I use this with my Canon 5D MK3 and performs as expected.

This card has the fastest write speeds I could find while being compatible with Prusa i3 MK3S 3D printers. I can consistently copy ~500mb of files to these cards in 11 seconds where my older cards would vary between 20 seconds and a minute for the same transfer. These also format faster and those seconds add up when you're doing many of them.

My grandson has been using this a lot, and it works very well. An excellent value, that performs almost as well as my much more expensive Prusa printer. Would definitely buy again.

In my bed room