Ps5 Controller Port Type

This is a great card. A bit bigger than I thought. It also does not have type c port.

High quality and faster using 3.1 Type A port

Spectrum one has been a great monitor to take center of my desk. It’s the one monitor I use with my PS5/Mac/Windows setup. Type C hub has been especially handy to clear up my desk from extra cables! Glossy FTW

Allows me to pipe audio from my PC's 3.5 port to my Behringer monitor controller.

I had an extra Type-C port on my dock, but I needed a Type-A, so this adapter works great!

This has been an excellent switch, and easily managed via the UniFi controller. The auto-sensing 802.3af ports (4 of them) are currently powering two access points and one Ubiquiti USW flex mini switch (USW-Flex-Mini), which is an awesome little 5 port switch in its own right. I'm able to set up separate port VLANS and other fun stuff on it. It's also a well built metal switch. It does get fairly hot, but not excessively, so you won't want to put it in a small, confined space without some air movement.

If your in need a managed switch with full Nbase-T and 10Gbase-T support with POE this is gonna be hard to beat. You will need a Unifi controller to run this switch as it does not have an independent GUI for management. But if your already in the Unifi ecosystem or your interested in buying into it, this makes a solid 10G copper and SFP switch for a home office, home lab, or small to medium office. The controller makes configuration simple and fast. It has full VLAN support and can be used as either a small core switch or a multi gig AP / client switch. My use case was to provide 2.5Gbps links to a router and PC, and 10G to a NAS. Then I use a downstream switch for the rest of the network. So far, aim very happy. However I will say the port negotiation for speeds above 1G is flaky. I ended up setting the port speeds manually which prevents the temporary port disconnects I was experiencing. This is the only com only complaint I have. Build quality is excellent. It is not fanless but virtually silent though I'm not pulling any POE out of it.

I use these on my SX3008F v1.20 and my SG3428X v1.30. I didn't need to do anything special in the Omada Controller for any 10GbE links to any device. I also didn't have to do anything special in the settings when linking the SG3428X to an EAP670, even though the latter has a 2.5GbE port. I used a Trendnet PoE adapter, which connects to the module. With these modules plugged into the 10GbE ports on my SX3008F, and with the other ends of the cables going to my ASUS gaming PC motherboard (2.5 GbE) or to my unmanaged Netgear 5-port switch (1GbE), I needed to check Enable for Flow Control in the Omada Controller for the port.

Picked this up to run three APs and play with the port authentication settings on the unifi controller. If this proves reliable it will compliment my unifi gear well.

I needed to run a Camera, DJ controller, SD card reader, and a USB mic from a single USB-A 3.0 port. The port had the power and capacity to host the devices and I had a plethora of spare hubs, some powered, some not. None of them worked. I searched for a solution and the Xcellon came through. All of my devices work together as they should. No errors, no drop outs, pure bliss.