Psu Window Case

My opinion these are the best psu's out there...All I use now.

Good PSU for the price.

Great MiniITX case. No complaints, a bit tougher to find a good PSU for a performance build

This case not only looks great, but is easy to assemble your parts into. The magnetic sides and HDD clips make it quick. Pro-tip if you're installing the case fans above the PSU. Install your motherboard first, then any cables on the bottom of the mobo(pwr/restart button, USB, case audio, etc) then your PSU case fans finishing up with the GPU. I did mine all backwards and had to remove parts a couple of times. All in all, this case looks great and is much quieter than my old one even though I have more fans installed.

I couldn't really ask for more. The titanium efficiency passive cooling have really lowered my case temperature and even in a case without much cooling (2 fans intake and 1 outtake with the top open and removed all dust covers). I have this PSU under a shroud so the heat goes out the back. My temperatures went down 20-30 degrees on average celsius on both CPU and GPU. Previously I had a bronze power supply and it generated so much heat I was unable to keep the side of the case on or it would overheat. So if you have a similar need of a good PSU do not underestimate how much heat is a factor that I completely ignored before. I would never buy anything under platinum rated again. The prime line is definitely worth it over the focus series, but I would probably go for a fanless one.

This case is just what I wanted to put together a clean, elegant, understated look, rather than a bunch of flashy RGB. I'm really pleased with the North's style, and with its functionality. Everything I needed to remove came off and and reattached easily during my build, and lots of access points made hardware installation easy. The dust filters are easy to get at and remove/replace, too. (I moved the case a few times while building and booting and so on, and managed to grab the PSU dust filter and slide it partway out by accident, so be aware of how you grip it when picking it up. I don't really consider this an actual problem, but do be aware if you're grabbing and moving it a lot, that both the PSU filter and the top plate are not reliable handholds.)

I bought this case for my most recent build due to the price and very positive reviews. After 5 months in use: Pros: Very quiet despite large 160mm fans, CPU & GPU temps kept very cool, plenty of room and Velcro straps for cable management, easy access for building, wide enough to fit large tower coolers like the Deepcool AK620, (all included in my build were Gigabyte Z790 AORUS ELITE AX ATX Mobo, RTX 3060 VENTUS 3X GPU, & Corsair RM850x PSU), and low-priced compared to similar cases. Cons: A little cramped working under the PSU shroud, the front dual 160mm fan design is unique making fan replacement more difficult. Overall I would highly recommend this case.

Excellent case. PSU shroud being on top gives the three 140mm on the bottom the most space to pull in air from the bottom. Love how the side and top panels just pop right on and off and you have the option to screw them shut if needed. Lots of airflow in the case and pushes everything up and towards the back of the case where the big perforations are. The 180mm fans are a bit loud but you can tune them with a fan curve. The back has plenty of grommets to route all the cables you need and room for cable management.

I'm loving my new computer. This case is just what I wanted, but keep in mind that you have to compromise, or cash out to get every feature. There is not a lot of space on the inside for cable management, so you may benefit from finding a PSU with shorter cables, or going for custom sleeves. Also, if you don't spring for a seriously tiny PSU, there won't be any space to install a case fan - I have a form factor PSU and with the cables attached it barely fits on the mounting. Heat is not a huge deal either way due to the vents on all sides of the case. Make sure there is enough clearance on each side (about 4mm) so the fans on your equipment can move air. it'll also reduce the noise.

Ordered to Canada, shipping was easy with duties precalculated and relatively fast. The fine mesh on the front and side of the PSU shroud make for amazing airflow in this case. RGB fans look good and worked right out of the box, just need sata power. The build quality is great. The cable covers on the back side make for a very easy, clean look. Having two tempered glass side panels makes the case decently heavy, but also adds to the solid build quality. The screws holding the vents on top of the PSU shroud are a little tough to get out.