Rca Digital Antenna Placement

Antenna placement and aiming are critical, but once you get it, they system works very good.

Needed an easy fix for my antenna and here it is! The placement within the receiver was a little tight... for big hands. But it worked out!

Works great with Neumann KH150 speakers for digital i/o (I had some RCA cables that didn't work or had digital problems like popping but this cable worked.

This cable is great for connecting many types of gear you may not have considered before. I use it to connect my digital recorder (which only has RCA outputs) to my studio monitors. Very high quality connectors.

We wanted to extend our Stereo system to other parts of the house, and after some research, I settled on this BT device. I'm using the BTA30 on the zone 2 (RCA analog) output of an Onkyo TX-8555 receiver to transmit to bluetooth enabled speakers and sound bars around the house. Since the Onkyo does not have digital audio out, I used an analog to digital audio converter** to go from the RCA output on the receiver to the digital TOSLINK input on the BTA30. Setup was simple and straightforward, just remember that the BTA30 has a volume knob, so remember to turn it at least halfway - i had left it all the way down and was trouble shooting for several minutes until I noticed the knob position - turned it up and it worked! I am experiencing a wee bit of latency if I'm listening to the same music in both zones at the same time, but that's most likely because the speakers I'm transmitting to are not APTX capable. In all, it's not that big of an issue, just something to be aware of. Overall, I'm extremely satisfied with the BTA30 - and the B&H shopping and shipping experience is second to none! **If you don't have a digital output available, you will need an analog to digital audio converter that accepts RCA audio inputs and digital TOSLINK output. You could use the BH #GEATVDA to accomplish this.

Purchased to convert old Handycam video8 tapes via rca jacks to digital. Easy and provided better images than other similar converters I've tried. Recommended for vcr or tape Camcorder to digital.

This microphone stand with boom does what I need it to do. I use it to mount a digital recorder on the boom. It allows flexibility of movement in placement of the recorder. The price was great!

I primarily power my Flanders monitor with these babies. The digital readout is nice and the placement of the d-tap and USB ports allow you to use both simultaneously.

I purchased this to replace an analog IEM antenna combiner that I was using on a Digital IEM platform that was having issues with dropouts and interference. The original (high-end professional) product had been recommended by another supplier, and I was skeptical that it would make any difference to replace as it was amplifying and combining the same signal. This combiner (made specifically with tuning to support Digital IEM's) instantly fixed all of the issues I had been chasing for months. The IEM's are now solid from hundreds of yards away, and no dropouts. This thing has saved my productions.

[This review was collected as part of a promotion.] This powered digital antenna works great. I get better more consistent signal compared to my non-powered digital antenna. This antenna has less interference as described. The black slim profile blends in well in our living room. I would recommend buying.