Rca Uhf Vhf Digital Indoor Antenna

I've used Sennheisser VHF transmitters for years and have been disappointed with both the analog signal quality and interference. This uses digital signals over wifi with a 16 bit sampling so the actual transmission of digital data is flawless within range. What you put in is what you get out. However, the microphone is utter trash. The frequency response curve must look terrible with nothing over 5K. I replaced the mic with a cheap JK MIC-J 044 and was very pleased. I had one other concern. There is no input level adjustment. Systems with automatic level adjustment typically sound terrible. I was unable to notice any compression or limiting. There must be some but I could not notice it on my tests. All in all - good value but ditch the mic.

Heavy duty metal parts. Using to support an indoor antenna.

[This review was collected as part of a promotion.] This is a review for the One for All - One For All 14426 Indoor Bar Antenna with Signal Level Indicator. This unit is very fashionable and looks nice in my family room. The signal level indicator was so helpful making sure it was in the best location. The system came with directions, velcro dots to help hold it in place and the USB AC adapter. Another nice thing was not having to have it pointing in a specific direction thanks to 360 degree multidirectional reception. I was able to pick up so many shows that I otherwise wouldn't have been able to see.

Nice little heavy duty stand. I don't use mine for a mic, I have a small indoor/outdoor antenna on mine. I thought about making a stand, but I couldn't make one as cheap as this. Service was great as usual. It actually arrived 2 days ahead of schedule.

[This review was collected as part of a promotion.] We put this One for All indoor bar antenna in our upstairs bonus room that has issues getting some channels in due to lack of reception. This antenna helped to solve that issue and we can know watch all our channels clearly. This was easy to install and I like the sleek and slim design that doesn't take up much space.

Works great with Neumann KH150 speakers for digital i/o (I had some RCA cables that didn't work or had digital problems like popping but this cable worked.

This cable is great for connecting many types of gear you may not have considered before. I use it to connect my digital recorder (which only has RCA outputs) to my studio monitors. Very high quality connectors.

We wanted to extend our Stereo system to other parts of the house, and after some research, I settled on this BT device. I'm using the BTA30 on the zone 2 (RCA analog) output of an Onkyo TX-8555 receiver to transmit to bluetooth enabled speakers and sound bars around the house. Since the Onkyo does not have digital audio out, I used an analog to digital audio converter** to go from the RCA output on the receiver to the digital TOSLINK input on the BTA30. Setup was simple and straightforward, just remember that the BTA30 has a volume knob, so remember to turn it at least halfway - i had left it all the way down and was trouble shooting for several minutes until I noticed the knob position - turned it up and it worked! I am experiencing a wee bit of latency if I'm listening to the same music in both zones at the same time, but that's most likely because the speakers I'm transmitting to are not APTX capable. In all, it's not that big of an issue, just something to be aware of. Overall, I'm extremely satisfied with the BTA30 - and the B&H shopping and shipping experience is second to none! **If you don't have a digital output available, you will need an analog to digital audio converter that accepts RCA audio inputs and digital TOSLINK output. You could use the BH #GEATVDA to accomplish this.

Purchased to convert old Handycam video8 tapes via rca jacks to digital. Easy and provided better images than other similar converters I've tried. Recommended for vcr or tape Camcorder to digital.

I purchased this to replace an analog IEM antenna combiner that I was using on a Digital IEM platform that was having issues with dropouts and interference. The original (high-end professional) product had been recommended by another supplier, and I was skeptical that it would make any difference to replace as it was amplifying and combining the same signal. This combiner (made specifically with tuning to support Digital IEM's) instantly fixed all of the issues I had been chasing for months. The IEM's are now solid from hundreds of yards away, and no dropouts. This thing has saved my productions.