Rcf Rear View Mirror Radar Detector Hot Wire

Takes the RAM mount to a new level of convenience! I may use this for a radar detector mount as well.

I use this ram mount on my 2019 k1600b to hold My radar detector.

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

Just perfectly designed by RCF and built very well!

I had my Sony DSC-R1 camera modified for taking pictures in Infrared light. Rather than having the visible light blocking filter replace the original hot mirror filter in front of the sensor, I had it replaced by glass transparent to IR through UV. This way I can use the camera for normal photography as well as IR and UV. My only problem is that the Tiffen Hot Mirror filter that I bought to be able to take color photos in visible light has no blue tinge, as do all the sensor hot mirror filters I've ever seen. This means that my color balance is shifted to the tungsten side. I had to do a white balance in manual mode on the camera because I can't adjust white balance in Auto, where I admittedly do much of my shooting. Not a BIG problem, but an unexpected one. Otherwise, it's great!

Strong, good looking case! Plenty of room in rear compartment for wire storage and a great place to rest a laptop!

250 feet !!!! Should be enough to wire the center rear and rear surround!!! BUT it's really about B&H So convenient , hassle free , and fully trusted

This works well as a head strap but it also works if you want to use it to wrap around something that may be easily scratched. This could mean the side view mirror of a car or maybe just to wrap around your pet. Over all, this product is one to have handy.

Good design and quality to protect Rcf speaker .