Removing Mold From Front Loader Washer

Received today, I wont get to deep in the unboxing as its very easy and the paperwork is child proof. It all fit together and even shows you where on the cartridge to put your finger pressure when replacing the ink for best results. A few things to think about. First I used ultra smooth fine art paper from Epson, it will feed through the top loader sometimes, though much more consistent in the front loader. BUT...It must be Very straight, use the lines on the entrance tabs and make sure the are lined up Perfectly on each side or you will repeat until its perfect, and this is done by hand, the feeder will not straighten it for you if you start it even a little bit off line. I was able to print out all the pictures you see on the rack (13 )with the starter inks, I ran out of light grey first then light vivid magenta. I got 4 prints after the light black low prompt came on the little screen on the printer, the computer will tell you well before that. A bit to much play in some of the plastic covers, and the feed tray cover on the front feed Must be closed each time after you feed it before you print. It will load but will not print until closed but there is a prompt to do so. Maintenance box is about 15 percent full after all these prints and setup, so with an extra box included you have plenty of time, most came form initial setup of inks. I actually think its faster than the average review says, but I have never been a production printer and I usually do not print border-less, I mat my most of work and its just covering up Very expensive inks. The little screen is very well thought out, bright, clear and menu items easy to find, its a touch screen that swivels up but Its tight enough and does not move when you use it. I will edit this if I find anything that may be of use. I am glad to have it,.... and as ALWAYS.... very pleased with the way B&H provides the best shopping experience available online or in store....

I like the size of this insert. It fits nicely into all my front loader backpacks, so I'm not limited to a "photo backpack ". Also it is just right for my z7, 15-30, 24-70 and 70-200 all f/4. Plus batteries and a few filters.

I purchased the Back Loader but I did not like zipping it up and flipping it over to access the front panel. The Font Loader works. For Travel with 2 camera bodies, lenses, drone, mics and accessories the Pro Light Front Loader is great.

Someone please tell me any other film washer better than this.

Inexpensive insurance against moisture and mold.

I can take off and put on the cap without removing the len's hood. Thus keeps the len's front element free of dirt.

I bought this to replace a Tiffen filter that I had occasionally used on a Canon 24-105 F4L. The Tiffen was junk, plain and simple. The only thing it was good at was being a barrier in front of my main lens element. I found myself removing it more often than not however because it had a notable effect on IQ. So, I ponied up and bought this. The difference is night and day. When holding the B+W in front of your eye at arms length, it is sometimes difficult to determine if there is in fact any glass in the filter at all. The brass mounting ring is very tight tolerance and took some effort to properly line up the threads. It is tight and very secure and I don't think I will be removing it any time soon. I will be buying more B+W filters to place on all my lenses.

Just what I needed to use my top loader with my action x.

Cut what you need, mold it, reuse it. Awesome invention.

Works great for conduit, not wire mold