Samsung Laptop Drivers For Windows 8.1

Got it very recently for my Windows 8.1 laptop and have only been using it for a few days. Overall my experience has been pretty good. The port on the IR sensor is a mini USB B and there is a slight overhang with the supplied cable since I connect the sensor to a USB on the same side as my laptop. The driver that it came with cannot calibrate this pen at all; I just used the built-in calibration tool. You need to reset the calibration if you want to re-calibrate. The pen is plug-and-play, but you may need to reload any existing browsers to get it working right. I prefer a pretty high resolution, so using the trackpad or trackpoint to move the pointer can be pretty time consuming compared to tapping with the pen. It's also very useful if you don't have enough room to properly use a mouse. Swiping left/right to go back/forward in a web browser is also pretty useful.

Good great with my m2 mbp and also windows laptop too, no need to install drivers.

I use windows 8.1 quite often. On this mac, all drives (except the internal flash drive) are external. Windows runs great off Thunderbolt connected drives. You can have multiple window drives and select the one you want on boot by holding down the option key.

Using an Asus ux501vw laptop, Windows 10, latest drivers and firmware. Works great! Write speed (Raid 0) 350MB/sec. Moved 1TB without any problems.

This is an internal drive, plain and simple. Starts up fast, extra thin (half the thickness of a normal 3.5 drive), runs cool (thinness allows for more heat dissapation). But... I had bought this to put in an external USB 3.0 enclosure to use with my Dell XPS 8700 which has Windows 8.1. Unfortunately, after hooking it up, it would perpetually disconnect itself during file transfers, especially with files upwards of 1gb. Thinking the drive was defective, I took the internal drive of my Dell, which was the same brand, model and capacity, and put that into the enclosure. Same disconnects occurred. Then I replaced the cable between the drive and computer with a USB 2.0 cable, and the disconnects stopped, although file transfers took 10x longer. This proved that the drives were fine, but they did not work in a USB 3.0 enclosure. I could live with that, until... After a week or so, my computer developed the same symptoms (constant disconnects) for other USB storage devices. Since it was USB 3.0, I blamed the USB 3.0 drivers which Windows 8.1 seems to have implemented so poorly. BUT THEN I STARTED GETTING READ ERRORS ON MY SYTEM DRIVE. I could not back up files without drives disconnecting every few seconds. In short, THIS HAD SCREWED UP MY OPERATING SYSTEM. After a complete reinstall of Windows, everything was back to normal and all my drives (except the Barracuda in external enclosure) could read and write properly. The next day I bought a WD Black and put that in the enclosure... BOOM ... 100gb of files transferred seamlessly. So, to summarize... DO NOT PUT THIS DRIVE IN A USB 3.0 ENCLOSURE OR IT WILL WRECK THE WINDOWS 8.1 OPERATING SYSTEM. 1 month of my life wasted, I can't return the drive since it isn't actually defective, thought I'd at least write about my experience.

I bought it to upgrade our Samsung laptop. It fits and I was able to install Windows 10 with no problems.

...After downloading the drivers needed to run it with Windows 7.....

I've been able to connect four Windows PCs (XP, 7, 8.1, 10) to an Epson all-in-one printer. Although my printer is wireless capable, I find USB connectivity more reliable and less frustrating. The packaged software (CD), as well as the included Installation Guide, are antiquated (Windows XP/Vista; Mac OS X) but were still useful for one of my connected PCs. Accessing the product manufacturer's website is required to obtain an up-to-date User Manual and to install applicable drivers for PCs with newer operating systems. This applies to Windows (7, 8.1, 10) and Mac (10.6 and above) with an available USB Type-A port. One 6-foot USB A-B cable is also included. Each of my PCs printed successfully to the one printer as intended.

Works ok load the software. If you have windows 8.1 go the pinnacle support go dazzle for 8.1 & reinstall the software after that works fine

Plug and Play! Amazing. For Windows 8.1, the device was automatically loaded and ready to use. Noise cancellation works phenomenal. The Clarity of the the voice is Top Notch! I would recommend this microphone for anyone on a tight budget! Our business is just around the corner from being able to start recording high quality, professional sound quality in our videos, thanks to Blue Microphones!