Sennheiser Headphone Repair Band

On many iMacs, the headphone jack is a point of failure. This is great way to repair your headphone jack because you can bypass the built in headphone jack entirely.

We have bought cheapo's before, and one of them came separated (The band came out of the clip). I was able to make a permanent repair so it's still useful. The Impact brand has much better quality materials (reflectors anyway, not sure if the band joint will separate with use). The white is not as translucent as the cheap one, so will give better results.

I've dealt with Sennheiser as a repair technician and found them to be a solid company that takes good care of its customers. So I went with this system and am totally pleased. Sound quality is excellent and with all the channels available, it's easy to set up and program.

I had 3 sets of Sennheiser's wireless Microphone that were still working, but the intallation along the antennas was cracked and peeling away exposing the antenna itself. So I did a search on YouTube and found it you can replace them antenna it wasn't a hard job to do. In fact I had to order a soldering iron because this is something that I usually doesn't do. I know I had to get antenna repair because I was getting dropouts since I replace the antennas the receivers and transmitters work that flawless. I knew if I had to send the transmitters and receivers into Sennheiser I would had to wait for the transmitter receivers to return which I use them almost on a daily basis. I highly recommend it if you have a Wireless set that need new antennas within this frequency range you can rest assured that they will work even if you have to send to a local repair and time and cost.

This case is great. Unfortunately a button on one of my two Sennheiser ENG receivers got squished in my camera bag a few months ago. I had to send the receiver in for repairs. Now this case has all of the pre-cut spaces for my wireless microphone gear so I don't have to worry about accidentally breaking something and doing without it during the repair work. Wish I had this case 6 months ago. I could have saved the receiver repair for half of the cost and had all of my wireless items stored in one place.

I use this box to have my lead singer sing through one channel and be able to talk to the band on the second channel through their headphone mix.I have used alot of mic switchers and most tend to bleed into the second channel. This box takes it cleanly in to the second channel. Perfect tool for me.

I play on my guitar but I'll never have a call to get in a band - I'm terrible. At least it's only me who can listen to it. For the Yamaha headphone? It's great. I've also listened to some old albums with them. Go ahead, buy them.

Excellent and inexpensive fix for problem with loud band that can be very over-powering. With the headphone amplifier they can turn themselves up as loud as they want in the headphone without affecting the level of the house, less of a headache for the sound technician.

My camera doesn't have a headphone insert so this cable helped me turn my camera into an all around one-man-band workhorse. Worked very well.

Situated between my source and my headphone amp, this little unit proved an ideal addition and enabled me to dial in the frequency performance of my headphones with subtle adjustments without compromising signal quality or adding any noise or undue input whatsoever. Many headphones don’t deliver every frequency band with equal dynamics, and those that excel at neutrality may need help delivering a more appealing soundstage. The 4-band Bellari EQ570 provides ample cut or boost in essentially the bass, mid-bass, midrange, and treble frequencies such that you can tailor your listening experience with precision. Great headphones sound even better. This is an efficient, affordable little device and it has my recommendation.