Surface Ethernet Adapter Driver Windows 10

No knock on the product, but I had hoped it would connect my USB -B ported laser printer to the USB-C port on my notebook. It's an older printer and the port is USB 2.0 standard. The description for this cable said USB 2.0 so I hoped Windows would recognize the printer. The printer manufacturer (very well known Brand) does not provide a driver for Windows 10, but their Website says Windows 10 comes with a driver for it. This printer worked with my previous Windows 10 notebook via USB, and via ethernet worked with previous Windows versions back to XP. The computer would see the printer and list it's name, but would not install the driver. I tried a few other USB adapters with same problem and no luck. Turns out you need software in addition to hardware to make this conversion. I have since obtained a Startech port adapter for connecting my notebook to dual monitors, mouse, keyboard, ethernet, and the printer all through the notebooks 1 free USB-C port. Had to install drivers for the port adapter first, but now everything is working great. If you have a new printer, with installation software, this cable may work just fine. If your printer is old, you will need a port adapter with software.

I tried this adapter on two Windows 10 laptops. Windows did not find and install a driver automatically on either one, but I came to this site, downloaded the driver package, and was in business on both machines in a few minutes.

This is the only adapter we found that actually worked with Windows 10 on a Surface Pro 3. Tech support was great to work with as they answered my questions finding something to work.

Worked great with my Windows 10 laptop. I did not need to use the Driver DVD.

I was looking for USB to serial adapter which will work under the Windows 7 and this adapter does exactly that. Even better - Windows 7 already has built-in driver for this adapter!

Be using it to connect a laptop to Ethernet and work works without any issues in Windows 10.

This adapter works well with Linux, but will require the user to compile the open source driver and install it. Careful instructions are on the web. I use it on a workstation normally attached to ethernet, but occasionally in need of wireless access. Quick speed test on a strong signal was about 250Mbps (650Mbps on ethernet).

Installed in a Windows 10 Desktop, installed the driver from the CD, and it works perfectly so far.

Pros: Very fast startup, Very easy to install using Samsung's Data Migration Software. I installed the 850 PRO by migrating my boot HDD to the 850 PRO and replacing the HDD (my C: drive) with the much faster 850 PRO. Everything went very smoothly in my Windows 10 AMD desktop. Cons: Samsung could do a better job on instructing the user on how to prepare the system prior to the start of data migration. For example there should be a set of instructions informing the user to make sure the AHCI driver is loaded on the Windows 10 system prior to the start of data migration. If you don't use AHCI you will not get the maximum performance from your ssd. If you install the AHCI driver after migrating the data to the ssd and then replacing the hdd with the ssd, you may lose the ability to boot the computer from the ssd. Windows 10 does not install the AHCI driver in a fresh install of Windows 10. Samsung should have step by step instructions on what to do to make sure we get best performance for which the ssd was designed.

After upgrading to Windows 10 my HP computer the built-in sound card stopped working and I couldn't find a driver to work with Windows 10, this small device was simple to install, just plug the device to a USB port and installed it's own driver automatically and it was up and running in no time. I don't mind the device sticking out is just like any USB drive.