Temp Controlled Switch

Sensors allow temp of one room on large zone to be controlled separately via cell phone app. Great for large areas controlled by one Nest.

Nice an bright. I use it in a Lowell Flood got reception and interviews...controlled by a dimmer switch.

I purchased this switch to supply connectivity to an AP and 3 - IP security cameras in a detached garage. This 5 port switch is outdoor in its temp handling range. However it does need to be installed in a weatherproof enclosure or inside a building (with or without climate control.) It DOES NOT have stand alone power, but instead supplies POE power tto itself and downstream devices by being powered by POE into port 1. This means you need to power this with a POE switch or POE injector upstream. It can be powered by 802.3af or at POE, but for any practical install (meaning powering devices downstream of the switch) it needs fed with a 60W 802.3bt POE supply. I'm using a TP-Link 60W POE injector and this works without issue. The switch itself is a full feature Unifi switch. Configured and controlled via a Unifi controller (Cloud Key) it can be setup by a user with intermediate knowledge of networking. Ports feature full VLAN support and control. For my use case, I needed to power an access point and 3 wired cameras. The FLEX is tailor made for this. Port 1 is power in an a trunk port. Port 2 is a second trunk feeding and powering a Unifi 6 Pro AP. Ports 3, 4, and 5 are set to a camera VLAN as well as supplying power. It does get warm to the touch. It passes full line rate speeds. For those already in the Unifi ecosystem and in need of switch for hi/low temp environments, this switch is a good option. I'll update if anything changes or if there are any issues.

This slick little PoE switch is controlled by the UniFi management software (I'm using a CloudKey 2 controller), so I can visualize it on my network and run updates, etc. Note that there is not a PoE pass-through, even though the switch can be powered via PoE (or USB-C), it cannot provide power to any PoE device plugged into it.

Perfect temp and dimmable.

Mainly use for photo transfers and temp back up.

its fast, accurate and low power-temp :]

Great for controlled lighting

This is one of the best ways to modify your umbrella with controlled light.

This unit allows my Nikon SB700 to be controlled remotely.