Underwater Video Surveillance Cameras Ethernet

GREAT FOR VIDEO SURVEILLANCE SYSTEMS.

I installed this in my Unifi Dream Machine Pro to record video from surveillance cameras and I does the job, I have always had good luck with Segate enterprise disks.

This is very fast memory with a long record of performance and long life, it works very well in Cameras, Video Cameras and surveillance equipment. I use these in my Laptop for Video, 4K Surveillance cameras.

Cameras easy to use and take great pictures. I use them for hunting and for surveillance around my property. I have several cameras.

Did the trick. We use DVI to ethernet converters to get the video from 4 cameras to the video booth. It caused a delay in the video signal. The Lip Sync Corrector allowed us to get everything back in line.

Work perfectly and great to have for continuing video surveillance.

Used it on vacation,and was definitely worth getting . Especially for underwater video and pictures.

Use it for four Surveillance Network Video Recorder. works good and very easy to operate.

The VOSKER camera is a great camera. I use it for surveillance around our house and it does the job perfectly. Thankfully it doesn’t pick up every little thing either which is great. Also there is a setting where you can change the sensitivity because I know sometimes the cameras can pick up every little thing. I have my camera set on video mode and the quality of the footage is great both day and night. Also what is awesome about these cameras is you can still use them as a trail camera and what’s great is you can put them high in the tree and have them look down on the trail or a field edge. I had never used a surveillance camera before until now and there’s no other camera I would use for surveillance than VOSKER. Thanks Dustin

We have purchased two of these so far to use primarily as NVRs for a large number of IP cameras on a school campus. Licensing costs aside, Synology Surveillance Station does a really nice job making it easy to set up and scale with the number of cameras you have. We linked two together, making one the primary and the other a secondary target for recordings. Surveillance Station records direct-to-disk, and does a decent job of adjusting camera settings directly using ONVIF. We have about 50+ cameras running at resolutions from 1280x720 up to 2560x1600, some PTZ, some ceiling-mount fisheyes, mostly wide angle fixed, and everything works pretty well. We were even able to use the manual camera configuration to use some uncommon double-lens cameras. With about 26 cameras assigned to each RS422+, we see about 20-25% CPU on each on average during a typical day. We can comfortably handle 32 per unit, and supposedly up to 40 if needed. With x4 6TB drives in each set in SHR-1 (equivalent to RAID5) we have about a month or so of footage retention. The licensing is a little pricey at $50 per camera (unless you buy in bulk from some european IP camera shops...), but it is perpetual and I think worth the expense. Using two of these units, 8 cheap drives from eBay (luckily these do not suffer from the Synology whitelist) and a bunch of camera licenses, for around under $5000 I was able to build and set up a really easy to use and reliable NVR system with plenty of future expandability. 2-3 users are regularly connected on their desktops without issue.