Usb 2.0 External Hard Drive Enclosure

I had an old 3.5 WD external hard drive that only had a USB 2.0 connector. I bought the Sabrent enclosure so I could use USB 3.0 instead. Once I removed the hard drive it was easy to install it in this new enclosure. You need to pay attention to the instructions and angle the drive to properly seat it into the SATA connector. I haven't tried removing it, but I don't need to. This enclosure uses a power plug. It's not bus powered. I do like that there's an on/off switch. Overall, what else can I say? It's a simple solution that works. I'll definitely be buying more of these.

I ripped an old 1TB hard drive out of an old USB 2.0 enclosure. It was easy to install it into this enclosure. It used small phillips screws. Having a set of small screwdrivers made it a simple installation.

This external hard drive is fantastic. It is compatible with USB 2.0 and 3.0. It is very fast compared to the USB flash drives we have been using in the computer labs. I would purchase more like these as my budget allows.

Used this drive in an Avastor HDX Pro external Hard Drive Enclosure. It was easy to install and format and has worked very well for the past three weeks at least. Am currently using it for video files with no issues.

Successfully converts USB-C to USB. I use this for my external hard drive.

This is my third Storejet enclosure. It's an easy way to take a hard drive from a laptop destined for recycling and repurposing the drive as an external USB drive.

Perfect for replacing a hard drive but still wanting to use the old one. My external hard drive broke but luckily it was the enclosure that was damaged so I removed the hard drive from the enclosure and got this adapter to be able to continue using the hard drive

Using the enclosure for external drive on MacBook Pro 13 unibody. Wanted the Firewire 800 speed for an external bootable drive. Found it best to follow instructions of NOT screwing the hard drive down to the heat sink(even though there were enough screws in the package to do so). As it turned out two of the drives I was using were bad so it was easy to just open the end-cap and slide the I/O board with hard drive out to replace then slide it back in. The two end-caps (one permanent the other has screws to hold it in place) hold parts inside fairly well with a 2.5 5400 rpm SATA hard drive. This case is not intended to be water-proof, shock-proof or dust-proof etc. Just an enclosure for an external hard drive best used laying flat and still. Happy with the fact that package includes USB 2 to USB 3 cable as well as Firewire 800 cable. device is capable of daisy-chaining Fireire 800 devices since it has two ports. Included is a pleather carrying case. Has a tiny on-off switch. Case is see-through clear plastic with reasonably thick construction. The blue LED when turned on is a good visual cue not to shake or move the enclosure as the hard-drive is on and spinning. Careful not to tighten side screws to hold the end-cap in place is they may strip or crack the plastic piece.

This External Hard Drive Enclosure is ideal for those who need a fast and reliable solution to back up, copy, etc. their data. And additionally you get a free version of Acronis True Image solution. Top product in top quality.

I have this drive in an Asus Arion usb-c external enclosure as a back-up drive and to quickly transfer games and movies between my laptop and desktop. Both my desktop PC and laptop are not the best and definitely have some bottlenecks, but even so I get over 600 mb/s transfer speeds 95% of the time for both reading and writing. It's become the drive I reach for the most for large video files especially. I definitely recommend it for this purpose, and I can only assume it would perform astoundingly well inside a pc as Kingston probably intended.