Usb Ethernet Adapter Not Working Linux

Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.

This adapter works well with Linux, but will require the user to compile the open source driver and install it. Careful instructions are on the web. I use it on a workstation normally attached to ethernet, but occasionally in need of wireless access. Quick speed test on a strong signal was about 250Mbps (650Mbps on ethernet).

[This review was collected as part of a promotion.] The Belkin USB-C to Ethernet + Charging adapter is amazing tool to have with you when you need an ethernet connection. The USB-C to Ethernet + Charging adapter charges your connected device while also providing an ethernet connection, so no need for multiple connectors. I have been using this on my Android phone and my laptop, both devices have a USB-C port and my Belkin adapter worked great on both devices. It provided an adequate charge and a stable internet connection without any issues. The adapter was immediately recognized by both devices and there was no need to install any software to make the adapter work. The adapter is also small and portable enough to carry with you anywhere you go. I would highly recommend this adapter to anyone looking for an ethernet + charging adapter.

[This review was collected as part of a promotion.] I received a Belkin USB-C to Ethernet + Charge Adapter 100W complimentary from Belkin and Influenster in exchange for my honest review. The Belkin USB-C to Ethernet + Charge Adapter 100W has been a huge game changer when it comes to my Teams meetings/video calls. In the past, I was missing out on critical information because of the internet lag, and calls were being dropping due to my internet's speed. With the Belkin USB-C to Ethernet + Charge Adapter 100W plug-and-play adapter, I no longer have a lag or have to worry with those calls dropping off. The adapter keeps my computer charged and my connection completely sound while I'm hardwired. So far, I'm pleased that the adapter hasn't overheated and has stayed cool to touch. The adapter is both small and portable, and works with most USB-C compatible devices. The Belkin USB-C to Ethernet + Charge Adapter 100W provides an Ethernet port, charger, and a nice boost of internet speed, all in one device, at great price. In my opinion, you can't go wrong!

Ive used quite a few of these SATA bridges. This one is one of the best ones. I used to use the OWC/NewerTech adapters, but Ive had a lot of them fail. I took a number of them apart, and they have a lot of defects. The last one I got had the cord glued on with hot glue and barely soldered. All of them had lots of poor solder joints and many of them had balls of loose solder rolling around inside. This adapter is actually constructed properly. Im glad I got this one. The fit and finish is very tight and clean, and its more durable and suitable for professional use. Ive been using it for a while now, and its been holding up extremely well. I used it in Mac OS, Linux, and Windows (mostly Mac OS and Linux) and it is plug and play without any drivers needed. Its based on an ASMedia controller and does connect at 10 Gb/s speeds if your computer supports it, but can drop down to slower USB 2 speeds if your computer does not support USB 3. It not only supports UASP and TRIM, but it natively supports SMART with smartctl in Linux (use -d sat). This makes it very useful as a diagnostic tool for me. I can connect drives and run SMART diagnostics before installing them in RAID arrays or computers. With a USB-A to USB-C adapter, you can use it with computers that do not have USB-C ports. One word of warning is if you use an active reversible USB-A to USB-C adapter like the Angelbird one, this adapter takes 5 V from your USB port to power the drive, and the active adapter cannot pass enough power to spin up some drives. However, if you use a passive USB-A to USB-C adapter, (non-reversible) you wont have any problems, just make sure that the USB-C plug is oriented a certain way when you plug it in so you get the speed you want. The 12 V input is a nice touch if you need to use a drive that needs 12 V power. The 12 V input does not provide power to the drives that only use 5 V (Ive tried), but this is fine since USB-C can provide enough power for most 5 V drives.

Bluetooth pairs well with Windows or Linux on my laptop, and the USB adapter provides reliable fallback. The mouse fits my large hands, feels solid, and responds smoothly.

I' use these for Linux distros, for me its better then USB drives...

I replaced a previous VAVA adapter because it was dropping the ethernet connection. This one does not have that issue. It has one less USB connection, but that is not an issue for me.

My laptop doesn't have an ethernet port. This USB adapter is a great solution.

[This review was collected as part of a promotion.] This USB-C to 2.5 Gb Ethernet Adapter was precisely what I needed as it adequately meets my demands for a stable, reliable internet connection while gaming and/or working at home. The usage of a USB-C cable allows for compatibility with a wide array of devices.