Used Truck 16 Refrigeration Units

Used 16 of these on 16 GoPro 8 units during a stunt show car jump. The footage is perfect and this card kept recording every frame up until the camera was was destroyed when the car impacted a concrete barrier (with the camera in between).

Can trigger up to 16 different units at a time.

Used for a cellphone mount. A bit bulky in my truck but, sturdy.

Used on kit 16-50

I have 5 of these units on my production truck, they have solved a lot of issues I was having with the limitations of SDI. I have run over 4000 feet of singlemode fiber with no issues. this unit can also be used to convert the HDMI out of a GoPro Hero 3 to SDI, something the other BMD convert boxes have a hard time doing.

Used this for a custom project of mounting a gimbal arm to a truck, works just as i wanted it to

Using 16 GP Hero 8 units, we shoot dirt track racing. A battery door is necessary to keep it in the camera while pulling all of the G-forces. The standard battery will not last a full race @ 4K. This little door allows us to use external power sources, keep the card & battery secured, and the camera guts sealed from the dust.

I use this card in all 16 of my GoPro Hero 8 units and rely on them to record my once-in-a-lifetime shots of dirt track racing.

These two 16 TB drives are my seventh and eighth Elements drives purchased. The 16 TB drive is quiet and has backed up my NAS flawlessly thus far. I started with 8 TB drives and 10 TB drives for backing up two NAS units (one Synology and one QNAP). As the NAS units grew in storage capacity, I found I needed 14 TB drives and now 16 TB drives to keep up. I now am shucking the older 8 TB Elements drives to upgrade my Synology NAS from 4 TB drives to 8 TB drives. The Synology Hybrid RAID (SHR) allows me to upgrade drives in size one drive at a time and I get added capacity with every second drive upgrade. With SHR there is no need to change out all the drives at once. This is a good use for the lower capacity Elements drives when you buy the newer capacities.

Used four of the receiving units in one of our auto programs large auto labs for a High school skills contest using. We used 100ft Pearstone Cat 6a Snagless Patch Cables (BH #PECAT6A100W MFR #CAT6-A100W) to connect the transmitter to the receivers. Images showed up as soon as we turned the system on. The hardest part of setting up was making sure the cabling was out of the way and taped down to prevent tripping hazards.