Washing Electric Blanket In Front Loader

I recently received my Delta 1300. I charged it up. Made 12 cups of coffee, charged a couple devices and ran my electric blanket on high for 6-7 hours. Used roughly 40%. Blanket used the most. I wanted to see how long the unit would last without recharge at my max need. Basically I can go winter camping in my truck for at least two days without a need to recharge. Probably at least 4-5 days, probably longer, in warmer weather (9 months of the year) when I do not need the electric blanket. For me this negates the need for solar panels. Less to buy, less to take with me. Also the power of the Delta is such that it allows you to run higher Watt items and run them longer. When you compare these factors against the competitive units, they either have less power and thus will not last as long or run all your devices. Then when you buy the solar panels you spend about the same for a less powerful battery. Other units with similar power cost a lot more. When deciding to purchase I also asked a lot of questions from support. I found them to be very helpful. I communicated via email and tended to always get a response same day in the evening, which was very fine with me.

I have been think to get one of this for my camping trip. mainly to run electric blanket and water boiler and instant pot and things like that while I am out there without the hook up. as well as recharge my camera battery, laptop and other portable electronic devices. One night I saw Jackery is having the 15% sale so I went into B&H to order it but I did not see the sale price here, so I called the customer service department and within 3 minutes i got a price match and order was place. and the product show up about a week later. The Jackery explorer 1000 arrived with 3 layers well protected boxed, yes, 3 layers, first is the inner product package. then a very well made middle layer shipping box, then another strong outer shipping box. I have used the Jackery Explorer 1000 on two trips already and so far it works really good, it takes about 6-7 hours to fully charge it if totally dried, but I normally keep it charging while I am driving so i never run it completely down, I ran a electric blanket one time in my car, and after about 6 hrs of sleep it still have about 60% left. I test it with my small rice cooker and it used about 30% of the battery only. i charge two cell phone always completely dead after a long hike, the indicator says only killed 1% of the battery. I have also try to use that for tire inflator/compressor, small vacuum cleaner, a powersaw, coffee maker........ the lit goes on and on, so far so good, only thing I don't know for sure is how good the battery will be after heavy use for a year.

Received today, I wont get to deep in the unboxing as its very easy and the paperwork is child proof. It all fit together and even shows you where on the cartridge to put your finger pressure when replacing the ink for best results. A few things to think about. First I used ultra smooth fine art paper from Epson, it will feed through the top loader sometimes, though much more consistent in the front loader. BUT...It must be Very straight, use the lines on the entrance tabs and make sure the are lined up Perfectly on each side or you will repeat until its perfect, and this is done by hand, the feeder will not straighten it for you if you start it even a little bit off line. I was able to print out all the pictures you see on the rack (13 )with the starter inks, I ran out of light grey first then light vivid magenta. I got 4 prints after the light black low prompt came on the little screen on the printer, the computer will tell you well before that. A bit to much play in some of the plastic covers, and the feed tray cover on the front feed Must be closed each time after you feed it before you print. It will load but will not print until closed but there is a prompt to do so. Maintenance box is about 15 percent full after all these prints and setup, so with an extra box included you have plenty of time, most came form initial setup of inks. I actually think its faster than the average review says, but I have never been a production printer and I usually do not print border-less, I mat my most of work and its just covering up Very expensive inks. The little screen is very well thought out, bright, clear and menu items easy to find, its a touch screen that swivels up but Its tight enough and does not move when you use it. I will edit this if I find anything that may be of use. I am glad to have it,.... and as ALWAYS.... very pleased with the way B&H provides the best shopping experience available online or in store....

I like the size of this insert. It fits nicely into all my front loader backpacks, so I'm not limited to a "photo backpack ". Also it is just right for my z7, 15-30, 24-70 and 70-200 all f/4. Plus batteries and a few filters.

I purchased the Back Loader but I did not like zipping it up and flipping it over to access the front panel. The Font Loader works. For Travel with 2 camera bodies, lenses, drone, mics and accessories the Pro Light Front Loader is great.

Since COVID we are streaming to YouTube but the camera was very near the ceiling and always had the ceiling lights in view and washing out the front of the room. By adding the extender we got rid of looking at ceiling lights and the washout.

Thought i lost this little torch, 9 months later it falls out off my washing machine, got stuck behind the front rubber door Gasket, still has the original battery that came with and it turned right on, A little rust near the ring that's all the damage it suffered. I'm a fire inspector and use this a lot to read gauges and find hidden no no's in back rooms, this light rocks don't hesitate just get one!

I use this transformer to run an old 24 volt edison electric ? lamp (3 bulbs) that is in my front yard. The original transformer burned out after probably 20 or so years, and this transformer had the same specs (volts, amps, current) so I gave it a try. It works great. No difference from the original other than it's made in China not the USA... Much quieter than the old one too. Not a sound. The original transformer I had used to hum.

I was looking for a case to carry and keep dry expensive lithium battery on an electric scooter, none of the other manufacturers have the size or the strenght needed for my project. HPRC have the best hard case i ever came across so far. and as a plus, the groove on the front and back have made my custom rack construction very easy. One more is coming down very soon to use as a front panier. ...

Just what I needed to use my top loader with my action x.