Wireless Router Wan Port

Awesome router! If you have 1G speeds from you service provider, the 2.5G wan port from this device will help get the speeds you deserve from your connection. The firmware and management software on this thing is amazing and responsive. Well worth the purchase!

Been waiting for this device for a long time. Even has 2.5 GB on the WAN port. Has the controller embedded - does what it says it does. super well built and easy to install and migrate to as always.

I will start by saying that my ISP is Vyve Broadband. I carried my rented cable modem along with my new Netgear DOCSIS 3.1 High Speed 32x8 Cable Modem (CM1000) out to the local Vyve Broadband office. They pulled up my account and removed the rented cable modem, the added my Netgear cable modem information that is required for activation. I changed my internet service to the 200 Mbps plan. After returning home I hooked up my new Netgear CM1000 cable modem, the cable to its input and a short CAT6 cable from the WAN connection to my Netgear router WAN port. I powered on the devices and the modem and router went to work, with various lights blinking. It took only about 5 minutes and the cable modem had set itself up completely and with the Netgear router. I logged in to the cable modem to have a look at the stats. I then went to a speed test sight which showed that my download was 211 Mbps and upload 20 Mbps. All of my PCs, router, switch and access point connect at 1000 Mbps instead of the 100 Mbps that it used to. Am I satisfied and happy with this purchase??? You better believe it.

I purchased this router because I have 2 WAN providers and 13 distance learning children and cannot have down time. Easy setup and great performance so far so good!

This new router is even better than the prior model the AX-88U which was the best router I had ever owned until now. First, this router is very easy to set up and control. ASUS interface could not be easier or more stable. Second, this router exceeds the speeds advertised by my internet provider and consistently maintains these speeds. I even set up dual WAN and the router is working perfectly. Dual WAN was the main reason I upgraded as the Dual WAN settings were not working correctly with the prior model.

This router is easy to config interface, toms of options in WAN and LAN configurations. Best price performance, recomended.

We’re easy to setup. The WAN connection immediately sped up my connection to the router. The 10GHhz connection to my 10Ghz switch is fantastic. The Quad-Band internet is very nice. Extremely easy to setup. iPhone router app took 20 minutes to recognize the new router, but after that is was very smooth.

This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

I use this with my Orbi Wifi 6 model. And thank god I don’t have to do Wan aggregation anymore. I just use one 2.5 wan port to my 2.5 to my router.

Works for my use case connecting to the serial port on a router.