Yale Post Office Box Locks

I've been getting more interested in Macro work and found one of my limitations is getting close enough to the ground to shoot small flowers and insects. This Manfrotto MT055 Carbon Fiber Tripod lets me do that. It's a very sturdy tripod. Far more so than my other tripods. The flip out leg locks work stiffly but they give great assurance that the will hold your equipment without failure. The legs splay out to just inches from the ground. The center post is great because it easily pops up and rotates 45 degrees to be parallel to the ground. I find this very useful. I know that extending that post out fully makes the setup feel a little unsteady, especially if your camera and lens have any significant weight to them. I bring it back half way and there's no problem. The XPO Ball Head that came in the lit is great. It operates smoothly, locks into a position quickly and holds that position very well. The Quick Release System let's me place my camera in and tighten the arca-type base to hold the camera. Releasing it involves losening the slightly then pushing a button the release the camera. Is you don't change the locking know, installing the camera the next time is a matter of pushing it on until you here the audible click. Tighten firmly and you're done! The levers and knobs on the ball head are large enough to operate even with gloves on and if you have something that the levers hit or interfere with, you can reposition the lever's orientation. The tripod and head are a little on the heavy side even with the carbon fiber. I could see it getting a little weighty on a long hike but I think I would put up with the weight for the sturdiness.

Substantial tripod with well-designed leg locks. I use it primarily for field photography in a macro setting. The center post can be shortened so that the camera attached to the tripod on a ball head sits under 18 inches above the ground but extends up above my head without using the center post extension. In addition, metal spikes easily replace the rubber caps on the legs. A fine piece of equipment, even if a bit heavy.  Will easily weight bear a heavy lens on a DSLR.

Stable and strong. The head has two locking screws, one to ensure the threaded post of the monopod does not loosen and the second locks the attached head so that it does not loosen. I use this for bird photography wwith a Canon R5 with a 400mm 2.8 lens and feel very comfortable with it. I strongly recommend this over more expensive monopods

This is the third D&S tripod I have bought. Sure the locks are a bit tough and you do need to be careful with the teeth on the center post but all else is terrific. These are a much better price that the M.... I bought that needs to be loosened and then manually lifted. I really like the smooth crank lift on the D&S model. The dolly wheels are great too but you had better keep them clean!

Picked up the 11-24 at the Post Office; took few shots of the steering wheel; and drove right into the Talkeetna mountains. Having used fisheyes for year I thought I would know what to do with an 11mm rectilinear...but this lens is different. My instant favorite lens for off-trail Alaska landscapes. Image quality and sharpness are excellent. Distortion is very low. Makes incredible panoramas that don't look stretched out. Heavy...but it's also a 20, 17, 14,13 and 12mm! Once in my hands weight doesn't matter! Use the 11mm most but love the zoom!

Post Office took their time, but arrived packaged perfectly and I cannot be happier as fits my Canon SX 70

While the US Post Office took an extra week and an half to deliver this, the item arrived and it works very well. Easy to set up and works as advertised. It's light weight means you should handle carefully, I imagine. Also, since the transmitter has no power switch (it only powers when pressing the trigger) you should do what I do and remove the batteries when it's in the bag to prevent running them down. In all, definitely worth the price.

I ordered the official mount kit for my Epson 5030 projector. It only came with a 6 extension. I rated this product 5 stars because it does exactly what it promises to do. It extends my Chief RPA mount down another foot, placing the projector exactly where I want it.While I could accomplish the same thing with a $$1.5 diameter steel gas pipe from Home Depot (yes I was actually using that). I would still need to paint the pipe white to match everything else.The Chief pipe is also aluminum, not steel, so its less weight/strain on the actual mount thats bolted to the floor joists above in the ceiling. Finally the Chief pipe has a square cut out, that can be used to hide the power/HDMI cables in. Make the installation look much neater & professional. For $23 this is pretty much a no brainer. Be advised B&H photo free super saving shipping means it will ship FedEx out of Edison, NJ to a local post office. From there the post office will deliver to you. I ordered on a Friday, received on a Thursday. So expect at least a week for arrival. If you need this item faster, use UPS ground or air. UPS ground ships from NJ/NY to VA/MD/DC in one day and was only $$more. Since I was in a rush, I should have chose that option.

The shipping was unbelievably fast and product was packaged so that it could survive anything the post office could throw at it and was in perfect condition when it arrived. As always, will continue to choose B&H over every other competitor.

Product works fine. Great ND variable filter. Post office delivery is terrible. Tracking of the package is less than acceptable.