The Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head provides reliable support for DSLRs, point-and-shoot cameras or video cameras up to 11 lb.

The tripod's three-section legs are fabricated from high tensile strength aluminum. It rises to a maximum height of 61.6" with the center column fully extended and folds down to a compact 21.3" for transport. Flip locks on the legs facilitate rapid setup and break down. Three leg angles: normal (80°), low (55°) and extra low (24°) are available via angle adjustment tabs at the joint of each leg. You can reverse the column with a twist of the butterfly knob or split it in two and use the short column for macro and low angle shooting as low as 8.3" from the ground. Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability, the center column employs a spring-loaded counterbalance hook.

The included BA-111 ball head features a single-action knob that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head's four bubble levels ensure accurate panoramas. The BA-111's built-in quick release comes with a camera plate that features a standard 1/4"-20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.

Load Capacity: 11 lb    Max Height: 61.6"    Min Height: 8.3"    Folded Length: 21.3"    Leg Sections: 4    Weight: 3.3 lb    5 Bubble Levels    Removable Ball Head

A spring-loaded counterweight hook is located at the bottom of the center column. The column can be separated into two parts to give you a short column for low angle and macro work

Leg cushions on two legs provide a firm grip in cold or wet weather

Two included hex keys attach to a tripod leg, so you're always ready to tighten components

Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap

Angle adjustment locks keep legs at the chosen angles

Center column is grooved to prevent rotation

Angled rubber feet for maximum contact with the ground

Tripod features reversible 1/4"-20 and 3/8"-16 screw to fit almost any head

Related Questions and Answers

Q: 1. Where is it made?

A: According to the information we have, our current inventory's Country of Origin is China. Please be aware this can change over the product's production life without notice.

Q: 2. Would this tripod be good for panoramic photos? I'm curious since one reviewer said, to pan requires unlocking the ball, which of course means the camera can move in any direction.

A: well as far that goes...yes you can unlock the ball bearing but the issue is the camera is at free range so the maneuverability may cause the image to seem a bit scattered and not constant.

Q: 3. I saw that you recommended the Benro S4 video head. Is it compatible with this tripod?

A: Yes, the Benro S4 video head is compatible with the Oben AC-1441.

Q: 4. Can this tripod be used for a Nikon D5100?

A: Yes, this tripod is capable of holding the D5000 camera with most any lens options you would commonly find with it.

Q: 5. Is this a pan-head or a fluid-head?

A: The head that comes with the Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head isnt a fluid head or a pan/tilt head. The head will be the BA-111 Ball Head.

Q: 6. Can the head be used with out the center post like it can on the AC-1431?

A: Yes the column comes apart with the supplied Allen Key like the 1431. By taking it apart the column is then very small and can used instead of the full column.This is an image link showing it, http://bit.ly/1dJXRA3

Q: 7. Is this tripod compatible with a Canon EOS 3i?

A: Works great with my Canon T3i.

Q: 8. What is the max height of the tripod without using the center column?

A: That would be 49.5 .

Q: 9. does the ball head allow for vertical placement of camera as well as horizontal? also, is the sturdy enough for a Canon 6D?

A: Yes, you will be able to shoot vertically with the Oben AC-1441 and BA-111 ball head. This tripod supports up to 11 pounds worth of gear, which will be plenty sturdy for the Canon 6D and a vast array of lenses.

Q: 10. Is this tripod compatible with a Canon EOS 5D Mark III?

A: The Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head is compatible with the Canon 5DIII.