This 3-Pin IP65 DMX Cable from CHAUVET DJ easily connects lighting sources to your DMX system for control from a single source. Featuring two 3-pin XLR connectors and an IP65 rating, this cable is suited for outdoor applications. It measures 5' in total length.

For DMX Systems    3-Pin XLR Connectors    IP65 Rated    5' Total Length

Related Questions and Answers

Q: 1. i want use CHAUVET DJ Pro D6 Dimmer Pack to dim lights and i want use switch for it .what are you recommend ?

A: For this inquiry, please send us an e-mail to stagelighting@bhphotovideo.com. Thank you.

Q: 2. I'm currently using a D-Fi Tx to control a few lamps on stand. Can I use multiple Tx on the same channel to broaden the coverage

A: In a system you will only use one CHAUVET DJ Wireless D-Fi XLR Transmitter. The other fixtures will need CHAUVET DJ Wireless D-Fi XLR Receivers.

Q: 3. Will this run a 5pin DMX system with a simple 3 to 5 pin converter cable?

A: The CHAUVET DJ Xpress-512S USB to DMX Interface can work with most 5-pin DMX lights. You will need an adapter. These are some adapter options: https://bhpho.to/3KQoaK5.

Q: 4. can i use this product to dimmer 8 Strand Lighting Leko Lite 50 Fixed Beam Ellipsoidal (120-230VAC)?a href= http://www.bhphotovideo.com/c/product/875710-REG/Strand_Lighting_11550c_50_deg_Leko_Lite_Ellipsoidal.html target= _blank http://www.bhphotovideo.com/c/product/875710-REG/Strand_Lighting_11550c_50_deg_Leko_Lite_Ellipsoidal.html/a

A: The answer is no. The fixture minimum bulb wattage is 575 watt. Times that X 8 and you have total load of 4200 watts. The total amp draw on each channel of the dimmer is 5. Also code only allows the load to not exceed 80% of the 5 amps

Q: 5. What is the total internal compartment size? WxDxH

A: The internal compartment is approximately 9.5 x 8.8 x 2.2 (241 x 224 x 56 mm) and there are four spaces that size. And the balance of the space is for cords.The specifications Chauvet lists is that it can hold up to 4 SlimPar 56 lights.

Q: 6. Is this Bluetooth?

A: No it's not

Q: 7. Can this dimmer pack dim those dimmable led filament bulb?

A: I agree with the previous response, this dimmer pack will allow you to adjust the output voltage to any one or combination of channels between 0 and 120 volts. The relay pack is made for LED fixtures and states that it has circuitry to eliminate LED flicker which google shows to be the problem with some LED dimmable bulbs, however I have never tried to dim any LED fixture or lamp.

Q: 8. Can one remote control two units of FXpar9?

A: You can control multiple units with this controller.

Q: 9. Can i take output from audio mixture to go to camera input

A: No, the CHAUVET DJ Wireless D-Fi XLR Transmitter will not facilitate the transmission of an audio signal from a mixer output. This device is designed to be used with XLR connections in a DMX lighting protocol and is not compatible for use with audio signals.

Q: 10. Can this be continuously powered via usb or do you have to run it off the internal battery?

A: Chauvet says to avoid letting the battery go below 10 percent. If the battery is completely depleted and you plug it in the device cannot be turned on right away. Let it charge a few minutes before turning it on. The battery also should not be charged for more than 24 hours. The short answer is yes you can run it while charging via USB but don't have it plugged in continuously all day.