This EVOLUTION 2x 100mm T3.2 S35 Prime Lens from P+S TECHNIK captures 2x magnified shots with S35 camera sensors and a PL mount. It features a focal length of 100mm and a maximum aperture of T3.2 for a deep depth of field. The mount is interchangeable and can be swapped out for an optional lens mount.

The focus ring can rotate up to 270° and the iris up to 90°, and both rings have 0.8 MOD cinema-standard gears. Focus distance and iris marks are displayed in feet. The prime lens is color-matched with the entire EVOLUTION 2x line and has a minimum focus distance of 5'.

Covers S35 Sensors    T3.2 Maximum Aperture    80mm Front Diameter    Cine-Style 0.8 MOD Focus/Iris Gears    5' Minimum Focus Distance    270° Focus, 90° Iris Rotation    Color-Matched with EVOLUTION Line

Compact and lightweight anamorphic lenses with 2x squeeze factor

High-resolution, color-matched to EVOLUTION line and also old Kowa lenses

PL mount; interchangeable with optional IMS mounts

Maximum aperture of T3.2

Designed for shooting via handheld, stabilizer, gimbal, or drone

Related Questions and Answers

Q: 1. Will this fit the 8sinn Red Komodo cage?

A: Yes

Q: 2. Does this include lens support? If not, is it fit screw size with ARRI Lens Support LS-9?

A: There is a lens support stud/foot on the bottom of the lens that will mate with any industry standard 15mm/19mm rod support system.

Q: 3. Can you have both the full frame adapter and the anamorphic adapter on this lens at the same time?

A: No you cannot.

Q: 4. What is the difference between this one and the apparent same model that sells for $5000 on your site?

A: This configuration of the Laowa Venus Optics OOOM 25-100mm T2.9 Cine Lens Bundle comes with the following accessories: - EF-mount bayonet - E-mount bayonet - Shims - Front and End Caps for every mount - Lens Cap with 3/8″ thread hole - Tools for mount conversions - Hard case with modular foam

Q: 5. Will Tilta Mirage Matte Box fit on this lens?

A: No, the Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens (PL Mount, Feet) has a 100mm front diameter and the Tilta Mirage will clamp onto lenses with up to 95mm front diameter at maximum.

Q: 6. Does this product include lens support? If not, is it fit with ARRI LS-9?

A: The Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens (PL Mount, Feet) (B&H# VE25100T29PL) comes with a Y-shaped holder which would typically be attached to a lens support. Depending on how you set it up, yes, it would be possible to use the ARRI LS-9 Lens Support for 19mm Studio Bridge Plate (B&H# ARK2.47227.0) as part of a means of support.

Q: 7. Will this fit the 8sinn Canon C70 cage?

A: Yes, the 8Sinn Lens Adapter Support for Evolution RF to PL Mount can be used with the 8Sinn Cage for Canon C70 and the 8Sinn RF to PL Lens Mount Adapter Evolution.

Q: 8. Does this include lens support? If not, is it fit screw size with ARRI LS-9?

A: The Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens (PL Mount, Feet) has a thread to accept a 15mm rod lens support like the Axler 15mm Rod Bridge Adapter BH #AXRAB15LWS • MFR #RAB-15LWS

Q: 9. what happens if I put this on my R5 with the adapter? any vignetting or will it just be wider than 100mm?

A: If the Meike 100mm T2.1 Super35 Cinema Prime Lens (EF Mount) is mounted on the Canon R5 in full frame mode, there will be vignetting as the lens is designed for Super 35 sized sensors. You can place the Canon R5 in crop mode in the menu as seen here: https://bhpho.to/3TkCU85, in order to crop the sensor to only capture the APS-C portion of the sensor to remove any vignetting.

Q: 10. Since this says it covers a super35 sensor, is it 25-100mm on a super35 or would there still be a crop factor of ~1.5x (Making it 37.5-150mm)?

A: Yes, The native crop of a S35 sensor is about 1.5x. The view of the Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens would be 37-150mm.