Boost the strength of the connection between your existing Ronin 2 Gimbal and R2 Ring with the R2 Main Mount for DJI Ronin 2 from CineMilled. Responding to requests from cinematographers, CineMilled designed this resilient mount with two additional M4 bolts and a heavy-duty lever for boosted clamping power.

The safety stops present on the DJI mount have been integrated into this model to prevent the gimbal from inadvertently sliding off the R2 Ring. To mount your existing accessories within the R2 Ring, threaded holes have been added that accept items either directly, or via a cheese plate (available separately).

Designed for DJI Ronin 2 Gimbal    Mounts R2 Gimbal on R2 Ring    Features 6 x M4 Bolts, Increased by 2    Sliding Locking Block Increases Pressure    Safety Stop Holes Limit Detachment    Threaded Mounting Holes for Accessories    Supports Optional Cheese Plate

Identical to the main mount on the R2, yet more resilient

Adds two more M4 bolts for a total of six M4 bolts, ideal for securing very high payloads

Sliding locking block clamps with significantly more pressure than the original mount

R2 Main Mount mates with both the CineMilled R2 Universal Mount and the DJI factory mount on the R2 Ring

Retains the safety stop holes to prevent the gimbal from disconnecting from ring, even before the clamp is tightened

Additional threads on the side and bottom surfaces to attach a cheese plate or other accessories inside the R2 Ring

Related Questions and Answers

Q: 1. Will this work with the C100 mark 2 if you have the extension arms or is the viewfinder still an issue?

A: You cant mount it without them and balance the setup correctly. I have successfully used them with the C100. Yes the eyepiece hits the frame when you tilt back more than I dont know,30deg. But all you do is tilt the Ronin backwards and you are fine. To balance the tilt axis instead of the handle being straight up during the procedure, take it off the stand and rotate the handle backwards 90deg and then proceed to balance.

Q: 2. Will this work with the Ronin RS2?

A: It will not.

Q: 3. If I use these on the Ronin MX with a Canon C300 mki will I be able to use briefcase and overslung mode normally?

A: I use the C100 mkii with these extentions in the ronin mx and the dimensions of the camera won't let you turn the ronin from normal mode to overslung without turning the ronin off. It' not the best camera size for the ronin.

Q: 4. Hi I m not sure whether my ronin is gen1 or gen2. Can I upload my ronin pictures & pls help to identify whether my ronin is gen1 or gen2

A: The 1st Generation Ronin has a square mount, while the 2nd generation has an angled mount. You are more than welcomed to email images to us at askbh@bhphotovideo.com if you feel that would be helpful.

Q: 5. Would this work on a Ronin MX?

A: It will not.

Q: 6. Does it work for a Red Epic?

A: These Extended Tilt Arms are designed to allow taller cameras to balance on the Ronin-M. It may be possible with a Red Epic, but it will also depend on the lens you are using and any other gear rigged up on the gimbal.

Q: 7. So I want to fly my Sony fs700 on a Dji Ronin. Would this allow me enough wiggle room to operate efficiently or would I need additional parts?

A: You will be good with these two parts. If you were to add equipment to the back of the camera, say a battery, you would also need the CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Short) B&H # CICM502 or possibly the Long version. CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Long) B&H # CICM503 But if you are using just the FS700 and nothing on the back, the two extensions will be just fine.

Q: 8. This works for the Ronin M?

A: No.

Q: 9. Does this work with the Ronin-MX as well?

A: Just got off the phone with DJI. Guy on the line successfully attached the same handlebars to both the Ronin M and MX. He also said they are identical. So I'd say yes, it'll work. Placing my order today. Will do my best to come back and tell u how it went!

Q: 10. Will this work with the original Ronin?

A: It does not. This is for the Ronin-M. It will not work with the original Ronin.