The small IP-S Isolation Pad from Auray is a monitor speaker isolation pad made from high-density acoustic foam. It is designed to decouple your monitor speakers from its resting surface by absorbing the monitor's vibrations. This stops reverberation through the desk or speaker stands, therefore preventing unwanted resonance. Removing these unwelcome vibrations results in greater depth of field, tighter low end and transient response, and a higher level of detail across the frequency spectrum.

Prevents Resonant Coupling    Reduces Vibration & Acoustic Energy    Greater Depth of Field    Greater Detail Across Frequency Spectrum    Tighter Low End & Transient Response    Improved Stereo Imaging    High Density Acoustic foam    Set Speakers at Three Different Angles    7.5 x 9.25" Surface Area

Up position: Angle your speakers up for desktop use

Down position: Angle your speakers down for use on a monitor bridge or shelf

Flat position: Flip the pads upside down to set your speakers flat on adjustable speaker stands

Related Questions and Answers

Q: 1. Will this small pad fit KRK Rokit 5 G3 monitors?

A: I have the KRK Rokit 5 and they fit perfectly. If you are putting the speakers under a shelf, be aware of the extra height the pad will give.

Q: 2. Can anyone tell me how thick these isolation pads are?

A: As you can see from the images, the pad slants from the back to the front. The height at the very back is 2.25 and the height at the lowest point of the slant is 1.75 . The front lip section is the same height as the very back, at 2.25 .

Q: 3. well these fit my KRK RP6G3?

A: The isolation pad is recommended for your speaker.

Q: 4. How thick is this pad?

A: It's not a level surface but about 2 or 3 inches.

Q: 5. What is the thickness of the thinner portion of the platform?

A: These are the dimensions provided by the manufacturer:Surface Area12.75 x 11 (32.4 x 27.94 cm)Dimensions12.75 x 12.75 (32.4 x 32.4 cm)

Q: 6. How about some dimensions?

A: Auray IP-S Surface Area - 7.5 x 9.25 (19 x 23.5 cm) Dimensions total - 7.5 x 11.25 (19 x 28.6 cm)

Q: 7. Are these better than a thick yoga mat?

A: Yes, the Auray IP-M isolation pads should work better than a yoga mat to absorb vibrations created by studio monitors. But the yoga mat will definitely work better than the IP-M pads would for yoga! :)

Q: 8. If you use this inside a closet would it be enough for a good quality VO recording?

A: If you are inside a closet with towels and blankets on the shelves, and an assortment of clothes hanging up, you will probably not need a reflection filter like this. That recording environment will already stop most of the echo and reflection this is designed to stop. The main job of a reflection filter like the Auray RF-C20 is to absorb and diffuse some of the sound energy from the voice, and also to prevent echoes of that sound from entering the rear of the microphone.

Q: 9. Can you use it with the Auray broadcast arm?

A: No. The Auray RF-C20 Studio Isolation Filter weighs 8.2 pounds, which is much more weight than the Auray broadcast arms can support. The Auray BA-XE4 Broadcast Arm with Integrated XLR Cable (B&H # AUBAXE4) and the BAE-2X Two-Section Broadcast Arm with External Springs & Integrated XLR Cable (B&H # AUBAE2X) can each support up to 3.5 pounds, while the Auray BAI-2N Two-Section Broadcast Arm with Internal Springs (B&H # AUBAI2N) and the BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable (B&H # AUBAI2X) can each support up to 5 pounds.

Q: 10. These should fit the KRK Rokit 8's ok, correct?

A: Yes they will be fine.