90 Deg Micro Usb Cable

Intelix Usb-wp-h-i Full Speed Usb Twisted Pair Wall Plate Extender

Product Code: ga10069
Availability: In Stock

$102.84 $155.29

Qty

0 reviews Write a review

Description
Reviews (0)

The Intelix USB-WP-H-I Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The Ivory Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type B
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.7 x 3.3 x 1.9"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB B female (client) to RJ-45 jack connectivity

Ivory Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. Assuming a high quality cable, will this be able to provide full USB 2.0 480 mpbs speeds at 164 feet? Thanks!

A: Yes, USB 2.0 can travel without signal degradation over 164 feet.

Q: 2. Will this work with another brand of transmitter? In other words, are there different protocols or a standard one for converting signals?

A: Sorry, but the Kramer HDMI over Twisted Pair Receiver B&H # KRPT572P can only be used with a dkgat product like the VM-114H4C, VM-1H4C or pt-571.

Q: 3. Do either of the USB ports have an amperage limit similar to the ChargeWorx Dual USB Type-A Wall Charger (1.0A and 2.4A)?

A: The ChargeWorx Dual USB-A/USB-C Wall Charger (Silver), B&H # CHCX3054SL, USB ports share up to 3.1A of power. Both can charge at up to 2.1A, however, if one of the ports is being used for a 2.1 A device, the other port will be limited to 1A of power.

Q: 4. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 5. Is this an Ethernet extender or just a Cat5/6 Extender? HUGE difference between just retransmitting across CAT5 wiring and actually converting to Ethernet Frames, Only the latter would allow you to use with switches or other L2 devices in between, which is the scenario I'm trying to use it for. Not looking to run a dedicated line.

A: For what I bought it for and I believe what its designed for, is to just extend and transmit USB protocol past the recommend 6 feet. In my tests I was able to extend up to 150 ft. This is a P2P device.

Q: 6. Will this work with a vga signal?

A: This model is made for HDMI specifically.

Q: 7. I am able to send USB signal from my M32r console to my mac book pro, running Logic Pro X... but I am not receiving any audio from the console to Logic. I've tried several different cat cables at different lengths, but still no luck. When I remove the transmitter and receiver from the equation, it works great. Any ideas as to why my computer recognizes the console while using the extender kit but will not pass any audio?

A: This would be heavily dependent on your specific situation the adapter itself is limited to USB Full Speed (12 Mbps): 100' (30.48 m) and USB Low Speed (1.5 Mbps): 330' (100.58 m). Your audio issue may be coming from the devices limited bandwidth.

Q: 8. Is this charger the correct voltage for iPhone 12 Pro Max and iPad? Thank you.

A: Unfortunately, the ChargeWorx 4-Port USB Travel Wall Charger does not list the exact wattage. I recommend the ANKER 33W 2-Port USB-C/USB-A Wall Charger with USB-C Cable BH #ANB2326J211 because it lists it as being 33 watts and that is enough for the iPhone 12 Pro Max and the iPad.

Q: 9. Would this work well for a USB Z-Wave stick? Distance is around 50 feet.

A: Yes, the Full Speed USB Extender will work with the USB Z-Wave stick.

Q: 10. could I use this in Israel?

A: The Xuma USB Wall Charger (Europe) BH #XUCAC124E can be used in Israel.

There are no reviews for this product.