Usb 2.0 Max Speed

Intelix Usb-wp-c-i Full Speed Usb Twisted Pair Wall Plate Extender

Product Code: ga10073
Availability: In Stock

$105.00 $130.20

Qty

0 reviews Write a review

Description
Reviews (0)

The Intelix USB-WP-C-I Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The Ivory Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type A
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.8 x 3.3 x 2.3"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB A female (client) to RJ-45 jack connectivity

Ivory Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. I am trying to send a usb signal from an m32 soundboard. will this be compatible with it?

A: Yes. But you will only get the rated distance stated on B&H for the protocol that your device uses so take that into consideration. Also there is an IC at each end if the cat6 so it will add a but of latency to the round trip

Q: 2. I will be connecting (soldering) this wall mic to a mic cord and was wondering which wires are positive/negative and the same for microphone cable?

A: There are two wires on the back of the mic. The blue wire is positive (+) and the black wire is negative (-). Wiring instructions should be included with the microphone. For further information, you can reach technical support at Telex by phone at 800-898-6723.

Q: 3. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 4. could I use this in Israel?

A: The Xuma USB Wall Charger (Europe) BH #XUCAC124E can be used in Israel.

Q: 5. Does this kit work with MacOS? I can't get it to work with a Mac Mini M1 running MacOS 11.4.

A: The Intelix AVO-USB-C Client Side USB Extender and AVO-USB-H Host Side USB Extender Kit Supports Cat 5, 5e, 6, or 6e Cables. Verify the desired twisted pairs are not being used for other LAN or telephone equipment. The RJ45 pinout in the twisted pair cabling should conform to the EIA/TIA 568A or 568B standard.

Q: 6. Does the USB-C input support video or is it charging and USB only?

A: The Comprehensive HDMI and USB Type-C Pigtail Wall Plate (White), BH # COWPDHDU3CAW, supports data transfer speed up to 5 Gb/s and is compatible with USB 2.0 devices.

Q: 7. Would this work well for a USB Z-Wave stick? Distance is around 50 feet.

A: Yes, the Full Speed USB Extender will work with the USB Z-Wave stick.

Q: 8. Can this be used with a USB hub? In particular, a USB 3 hub on the device end? I'm only expecting USB 2.0 speeds. A competing device only worked with some USB 3.0 hubs.

A: The IOGEAR USB 2.0 BoostLinq Ethernet Extender has to be connected directly to the computer. Now as far as using it with a USB hub on the device end, it may be possible. If you are planning to use it that way, then I recommend to get a USB hub with external power.

Q: 9. What is the max length of hdmi input cable for this aten ve806t?we tried using 5m hdmi but flickering happens

A: This unit can support up to 40m of cable for 1080p resolutions. If you're seeing flickering, we'd recommend slowly changing the EQ dial on the receiver side and see if a different number works better.ATEN Support

Q: 10. I am able to send USB signal from my M32r console to my mac book pro, running Logic Pro X... but I am not receiving any audio from the console to Logic. I've tried several different cat cables at different lengths, but still no luck. When I remove the transmitter and receiver from the equation, it works great. Any ideas as to why my computer recognizes the console while using the extender kit but will not pass any audio?

A: This would be heavily dependent on your specific situation the adapter itself is limited to USB Full Speed (12 Mbps): 100' (30.48 m) and USB Low Speed (1.5 Mbps): 330' (100.58 m). Your audio issue may be coming from the devices limited bandwidth.

There are no reviews for this product.