Monitor two different cameras simultaneously for your next live broadcast using the 1920 x 1200 resolution Lilliput Dual 7" Rackmount Monitors with 3G-SDI & HDMI, which can be installed in a video wall or broadcast truck thanks to its 3 RU form factor. Various video assist functions such as false color, histogram, and timecode are independently available for each monitor, allowing production managers to easily and precisely analyze image quality. Custom 3D-LUTs can be uploaded using the USB-A input for accurate color comparison.

Two 3G-SDI and two HDMI inputs support video up to 1080p60 and 2160p60 respectively. There are also two 3G-SDI and two HDMI loop outputs, which expand your display options. Control for both monitors is possible with the onboard buttons or using the LAN input and a connected computer to adjust settings like picture, marker, function, source, audio, and tally light. Audio can be monitored via the two 3.5mm headphone jacks.

1920 x 1200 LCD 7" Screens    For Video Wall or Broadcast Truck    3G-SDI and HDMI Inputs/Outputs    Supports up to 1080p SDI and 2160p HDMI    Load Custom 3D LUTs via USB    Support for HDR    Ethernet Input for Control    1 x Headphone Jack per Display

Related Questions and Answers

Q: 1. How deep does a rack case need to be to fit this pullout monitor? What is the MINIMUM depth? Is it less than 19" or 20" or 24"?

A: The rack case needs to be at least 19.9" deep.

Q: 2. Why will this unit not show a composite feed picture ?... but it does show with the HDMI.

A: This monitor is compatible with HDMI, AS I, Component and composite. If you have one that you are unable to select composite, please email us at info@delvcam.com for support. All of our monitors carry a 1 year warranty and are reliable for long beyond.

Q: 3. I have 4 cameras. Two are HD-SDI and two are composite video. Can I attach all four cameras and toggle back and fourth between the inputs? One camera of each type would be connected to each side of the unit

A: Yes, you would be able to do that, but only if one SDI and one composite camera are connected to the corresponding inputs per single monitor. There are only one SDI and one composite input per side.

Q: 4. The specs indicate that this had DVI input and outputs. ....but the pictures show that is does not include DVI I/O, but rather that is a custom add-on. Which is the case?

A: My got DVI.

Q: 5. Is this monitor HDCP compliant?

A: Feelworld does not list HDCP compliance in their specs for the FeelWorld T51-H Triple 5" 2 RU HDMI Rackmount Monitor.

Q: 6. Will this remember its power state, if I use it on a switched power strip?

A: Yes, but we highly suggest running the following unit on a Power Distribution Unit system in order to protect your investment properly.

Q: 7. Can you have a SDI input on one side and on that same side have the signal pass through HDMI out?

A: I'm afraid not. The outputs on this unit are loop outs only, they do not offer cross conversion as well.

Q: 8. Does the unit remember which monitors were set to on/off between each power cycle? Or do you manually have to power up each monitor every time you power the unit?

A: Yes. Each unit has to be manually powered up in order to use.

Q: 9. Does this down-scale to its own native resolution? As in, can I give it a 1080p signal?

A: Yes it does and yes It can accept a 1080p signal.

Q: 10. Does the HDMI pass-thru change the signal at all?? Let say you send 1080p23.97 to the monitors as a pre-ATEM, than this will change to say 1080p59 or something?

A: There should be no changes whatsoever to the signal integrity via the HDMI pass-thru.