Create a tailored car mount by connecting the 10" units of 5/8" Rigging Rod from CineMilled. This set of two rods is solid for strength and milled from 6061-T6 aluminum. It is an integral part of the Houdini ecosystem, compatible with the clamps that hold the car mount together. Endlessly customizable, this rigging method enables very specific positioning of your camera to capture each angle on the storyboard.

For Universal Back Seat System    Mounts 2nd Control Station    Two 5/8" x 7" Rigging Rods    Two 5/8" x 10" Rigging Rods    Two 360° Houdini Rod Clamps, 5/8"    Four Rigging Rod Clamp 5/8"

• Use for rigging of any number of things inside or outside vehicles.
• 10" length for full customization of your car mount.
• 5/8" of solid 6061-T6 aluminum.

Related Questions and Answers

Q: 1. Is there a mobile Gimbal that works with this Receiver attached to the back of the phone? Most block the lightning / usb-c port

A: I bought a longer USB-C to lightning cable and rubber banded the receiver to the gimbal handle. It barely works due to the weight.

Q: 2. How to buy ?

A: Just go to our website a href= http://www.bhphotovideo.com target= _blank www.bhphotovideo.com/a then go to the link below. From there proceed to check out.a href= https://www.bhphotovideo.com/c/product/1333053-REG/samson_swgmmshhq8_go_mic_mobile_receiver.html target= _blank https://www.bhphotovideo.com/c/product/1333053-REG/samson_swgmmshhq8_go_mic_mobile_receiver.html/a

Q: 3. I need a mic to do interviews with my fuji xt2, will this work?

A: This mic would work well with your camera, but a receiver is required as well. The Samson Go Mic Mobile Digital Wireless System with Q8 Dynamic Handheld Mic/Transmitter, BH #SASWGMMSHHQ8 would have everything you need to connect the wireless mic to the Fujifilm XT2 camera.

Q: 4. Is this compatible with Wireless Go II as well?

A: It is not as the Rode Wireless Go II makes this kit unnecessary. The Wireless Go II is a receiver that accepts two transmitter. This kit is designed for two separate receivers.

Q: 5. I currently own the Samson Go Mic Mobile system with the Q8 handheld mic. Can I use two of the LM8 Lavalier packs with the receiver that I already have? Or do I need to purchase the Dual Channel Lav System?

A: The Samson Go Mic Mobile reciever will allow for two transmitters, so you can add this body pack and lav to your system in additon to the Q8 handheld transmitter for a two channel system.

Q: 6. Would I be able to connect this to my laptop with the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter?

A: Yes you would. https://www.bhphotovideo.com/c/product/1518575-REG/audio_technica_consumer_atr2x_usb_atr2x_3_5mm_to_usb.html

Q: 7. how long is the arm from one side-mount to the other side-mount? thanks.

A: The Godox Dual Mount Arm measures to 16 inches from 1/4"-20 to 1/4"-20 mounting points.

Q: 8. Can you use the two Wireless Go II 2pack receivers and turn it into a mobile four-channel audio system?

A: Yes, The Rode Dual Cold Shoe Mount and Splitter Cable Kit would allow you to record 4 channels. You would need two Receivers.

Q: 9. Can I do real time audio monitoring?

A: When sending audio out of the Samson Go Mic Mobile Digital Wireless System with Q8 Dynamic Handheld Mic/Transmitter via the Micro-USB connection, the onboard 1/8" output can be used to monitor audio in real time. If the 1/8" output is needed to send audio to another device, monitoring would need to be done via a headphone output on the device connected.

Q: 10. will this work with samson qe fitness headset?

A: Hello, Thank you for contacting Samson Technologies. The QE headset will connect into this belt pack along with any of our other headset/ear set microphones with a P3 connection. If you have any other questions or inquiries, please let me know at any time. Best Regards, James