For your M3 rigging needs, this 4-pack of CineMilled M3 x 5mm Stainless Steel Screws are tough, durable, and suitable for use in rigging your cine equipment. Made in the USA from 318 stainless steel, each screw resists corrosion, even if completely submerged in salt water, allowing you to create a long-term rig that can be disassembled about as easily as the day you built it.

318 Corrosion-Resistant Stainless Steel    Made In the USA

Related Questions and Answers

Q: 1. Will this tripod be a suitable replacement tripod for a Celestron CG-4? If not, which tripods are suitable even if overkill?

A: In regards to maximum weight capacity the iOptron 1.25" Stainless Steel Tripod is compatible with the iOptron 1.25" Stainless Steel Tripod. However, it is proprietary to accept the SkyHunter GoTo mount SkyGuider Pro tracking mount iPano AllView camera mount SkyTracker/SkyTracker Pro camera mount SmartEQ/SmartEQ Pro mount SmartStar/Cube mount with an M8 mounting hole SmartStar/Cube mount with a 3/8" mounting hole

Q: 2. I want to remove the foot from the tripod collar of my Nikon 600mm f/4E FL ED VR lens. There appears to be 4 screws. What's the proper tool or hex key size for loosening these screws?

A: To take off the Nikon 600mm f/4E FL ED VR lens you need a 2.5mm hex key like the one that comes with the Wimberley Set of 4 Screws for Select Lens Feet (M3 x 12mm).

Q: 3. Can this be used as a counter weight for monopods and is it male and female 1/4" threads on it?

A: Yes, it may be used as a counterweight and yes, it does have male and female 1/4 20 threads.

Q: 4. Does this work with the Ronin-MX as well?

A: Yes, this will work with the Ronin-M and Ronin-MX.

Q: 5. What are the difference between these and the DJI extension rods for the Ronin M?

A: The extension arms from Cine Milled are 2.5 x 0.5 x o.5 / 6.4 x 1.3 x 1.3 cm and they do not have an end cap.DJI Extends the Vertical Adjustment Arms, located on both sides of the camera base plate, by 30mm.

Q: 6. Special order

A: At the time of this posting, February 5th 2018, this part is in stock. It is not a Special Order Product.

Q: 7. Is this eyepiece compatible with the ETX-60AT telescope?

A: I have checked the Meade Manual available online. The telescope uses the standard 1.25 eyepieces. I would imagine that standard eyepieces are capable of achieving focus since they talk about buying extra eyepieces. With a 60mm 350mm focal length the 25mm and 9mm eyepieces supplied with the unit produce 14 and 39 magnifications and a 5mm would produce 70 magnifications. From my early experience with a longer focus refractor a practical absolute maximum magnification is twice the diameter of the front lens in millimetres (that is 120), providing the optics are good. What I am saying is, Don't expect to just keep adding magnification - the image will become very faint and fuzzy. Besides at such very high magnification strange things happen. The very small exit pupil projects floaters etc and granular 'things' in your eye directly onto your retina overlaying the 'real' image and becoming very annoying.The 5mm X-Cel has a nice wide 60 degree field, and at 70 magnification high power should prove a very satisfactory complement to the 25mm and 9mm if the telescope lens quality and optical system is good.Because the magnification is higher, the image will be fainter so it is more likely that you will use it for Moon, Planets, and Double Stars. Also it will require more care to locate objects. Still it should prove a good choice for higher magnification use.As you see from the illustration it will be bulkier and heavier but a price must be paid for the wide field and good eye relief.

Q: 8. Can it fit on a celestron astromaster 114eq?

A: Yes this eyepiece can fit onto that scope since it takes a 1.25 Eyepiece opening.

Q: 9. What is the weight capacity?

A: The iOptron 1.25" Stainless Steel Tripod for SkyHunter / iPANO / SkyGuider Pro / SkyTracker / SmartEQ /Cube BH #IO3221V2 • MFR #3221 has a load capacity of 30 lbs.

Q: 10. If I use these on the Ronin MX with a Canon C300 mki will I be able to use briefcase and overslung mode normally?

A: I use the C100 mkii with these extentions in the ronin mx and the dimensions of the camera won't let you turn the ronin from normal mode to overslung without turning the ronin off. It' not the best camera size for the ronin.