You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Cinemilled M4 X 10mm Stainless Steel Screws (4-pack)

Cinemilled M4 X 10mm Stainless Steel Screws (4-pack)
  • Product Code: ga100859
  • Availability: In Stock

$5.16 $6.19

For your M4 rigging needs, this 4-pack of CineMilled M4 x 10mm Stainless Steel Screws is tough, durable, and suitable for use in rigging your cine equipment. Featuring socket/cap heads, you drive the screws with an Allen/hex key (not included). Made in the USA from 318 stainless steel, each screw resists corrosion, even if completely submerged in salt water, allowing you to create a long-term rig that can be disassembled about as easily as the day you built it.

318 Corrosion-Resistant Stainless Steel    Socket Head Cap Screws    Made in the USA

Physical
Material of Construction318 Stainless Steel
Dimensions0.4" / 10 mm
WeightNot Specified by Manufacturer
Packaging Info
Package Weight0.025 lb
Box Dimensions (LxWxH)8.05 x 8 x 0.35"

Related Questions and Answers

Q: 1. Does the 3.5mm line input also support 32 bit float?

A: Yes, when using the 3.5mm and XLR-1/4" inputs on the Zoom M4 MicTrak Stereo Microphone and Recorder, you can record 32-bit floating point audio.

Q: 2. Is this spike set compatible with Sirui AM-284 and AM-324 Tripods?

A: The Desmond 3.6" Stiletto Tripod Spike Feet with 10mm Threads for Select Sirui Tripods (3-Pack) is not compatible with your tripods.

Q: 3. Will this fit the Sirui N-2204X?

A: The Desmond 3.6" Stiletto Tripod Spike Feet with 10mm Threads are not compatible with the Sirui N-2204x tripod. But the N-2204x already has retractable spikes built in.

Q: 4. Will this work with the C100 mark 2 if you have the extension arms or is the viewfinder still an issue?

A: You cant mount it without them and balance the setup correctly. I have successfully used them with the C100. Yes the eyepiece hits the frame when you tilt back more than I dont know,30deg. But all you do is tilt the Ronin backwards and you are fine. To balance the tilt axis instead of the handle being straight up during the procedure, take it off the stand and rotate the handle backwards 90deg and then proceed to balance.

Q: 5. Will this work with the original Ronin?

A: It does not. This is for the Ronin-M. It will not work with the original Ronin.

Q: 6. Can i use this tripod with the new ZWO AM5 mount?

A: Yes, the ZWO AM5 can be mounted to the iOptron 1.25" Stainless Steel Tripod for SkyHunter / iPANO / SkyGuider Pro / SkyTracker / SmartEQ /Cube via its 3/8"-16 screw.

Q: 7. What are the difference between these and the DJI extension rods for the Ronin M?

A: The extension arms from Cine Milled are 2.5 x 0.5 x o.5 / 6.4 x 1.3 x 1.3 cm and they do not have an end cap.DJI Extends the Vertical Adjustment Arms, located on both sides of the camera base plate, by 30mm.

Q: 8. can I use these screws to screw a Sirui TY-5DIIIL L-Bracket Plate to my Canon 5D III camera?

A: The person who answered the question before me is correct. It depends on how thick the floor of the plate is. Notice that the screw has a reduced diameter portion between the threaded portion and the head. That portion is 1/4 inch long. I made my own camera plate in a machine shop. I made it so that the plate is 1/4 thick. I did not have to use any spacers or washers. B & H has shorter D-ring screws that have a shorter reduced diameter section. Check how thick the floor of your camera plate is and get either a longer or shorter screw.

Q: 9. What weight is this counter weight?

A: According to CineMilled's website, these are 11.5 oz/326 gm.

Q: 10. Can I use this to mount a Canon J14ax8.5B4 lens to a GH5?

A: Yes, the KIPON 2/3 to M4/3 Adapter supports 2/3" B4 lenses. The Canon J14ax8.5B4 from our research is a B4 mount 2/3" lens. It also has a 2x extender, which is perfect for your needs. Also, the KIPON adapter supports a MFT camera mount which is compatible with the Panasonic GH5 camera.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Lex Products 20a Bento Box Powercon Breakout Box

$3,894.66 $5,257.79

Products You May Like

Istarusa Molex To 4-pin Converter (12v)

$26.97 $35.06

Lowepro Lens Case 11 X 26cm (black)

$149.64 $181.06