Audio engineers looking for a highly flexible modeling microphone with impressive recording capabilities should check out the Antelope Edge Note, a small-diaphragm condenser modeling microphone with over a dozen classic microphone models well suited for studio and live sound applications. The Edge Note is a great solution for capturing a wide range of musical instruments.

With is exceptionally high 146 dB sound pressure level, -10 or -20 dB pad attenuation, and 75 or 115 Hz high-pass filter, the Edge Note microphone system is an ideal choice for instrumentalists, sound engineers, and studio owners searching for a flexible, high-quality affordable recording tool. The mic modeling technology reproduces the sound of classic microphone models either natively inside your DAW or via FPGA processing inside an Antelope audio interface (in real time).

iLok 2 or 3 required to use emulations as native plugins within your DAW.

13 Emulations of Classic Mic Models    Back-Electret Design, 48V Phantom Power    Transparent and Balanced Sound    Accurate Transient Response    Cardioid Polar Pattern    20 Hz to 20 kHz Frequency Response    -10 or -20 dB Pad, 75 or 115 Hz HPF    146 dB Max Sound Pressure Level    Black Matte Metal Housing    Includes Shockmount

• 13 microphone emulations of classic microphone models
• Back-electret design provides transparent, balanced sound, and accurate transient responses
• Cardioid polar pattern suitable for a wide variety of recording scenarios
• Frequency response of 20 Hz to 20 kHz covers the audible spectrum
• Signal-to-noise ratio of 69 dB
• Pad attenuation switch (-10 and -20 dB) improves close-miking of loud sources, ensuring a clean signal without distortion.
• Maximum sound pressure level of 146 dB
• High-pass filter switch (75 and 115 Hz) eliminates low-frequency rumble and compensates for proximity effect
• Metal housing and black-matte finish provides style and endurance
• Includes shockmount holder to eliminate unwanted vibrations and provide easy positioning
• 48 VDC Phantom Power required

• The Edge Note takes on the character of some of the finest small-diaphragm mics in existence, delivering stunning detail and realism.
• A total of 13 mic emulations reproduce the sound of legendary microphones used in the best recordings from the last century. They can be used in real time with an Antelope interface (via Synergy Core processing).
• If the user doesn't have an Antelope interface, a native plug-in emulation is available for any DAW and the microphone emulations can be easily applied to the dry audio recording. (iLok 2 or 3 required to use emulations as native plugins within your DAW)

• The flat frequency response of the Edge Note provides an exceptionally clean signal. Capturing the smallest detail of an acoustic guitar or a graceful cello becomes an easy task.
• Capturing audio in the most neutral way without dramatically boosting frequencies across the spectrum ensures that when applied, the mic emulations will sound as close as possible to the original microphone being emulated.

• With an astonishing SPL of 146 dB, the Edge Note is an excellent choice for recording the loudest sources. Get the most out of a drummer’s performance or a blasting trumpet solo without clipping the converter.
• For particularly demanding scenarios, the attenuation pad can reduce the level with -10 or -20 dB. Additionally, the high-pass filter facilitates the handling of the low-end frequencies and negative aspects of the proximity effect.

• Aalborg 4006
• Berlin 184
• Berlin K53
• Berlin K54
• Berlin K86
• Freiburg 6
• Hamburg 211
• Hamburg 40
• Hamburg 441
• Illinois 57
• Illinois 7B
• Perth 55
• Vienna D112

Related Questions and Answers

Q: 1. es compatible con studio one?

A: El B&H # SLSDVMSVMS1K si es compatible con Studio One, por medio de un interfaz de audio.

Q: 2. would this fit the Sanken c41?

A: The Sanken CU-41 dimensions: 50mm (2 inches) diameter. Although not tested with this microphone specifically, the Auray mount should be able to accommodate the Sanken CU-41 two-inch diameter.

Q: 3. Hello, would this fit on a Neumann 89i respectively over a Neumann WS89?

A: This windscreen is designed to fit over the Rycote 45/100, which is a foam shield for 2.17" diameter mics. Since the Neumann U89i is 1.8" in diameter, this windscreen will be too large for the WS89.

Q: 4. does this support the Samson Gtrack Pro?

A: Thank you for your question. This shockmount will not fit the G track. You can use the Samson SP04 (BH #SASP04TB)

Q: 5. Will this fit over a seinheiser e835?

A: No. The Auray WCF-UB440 is for a large diaphragm condenser mic. For the Sennheiser e835 you can use the Auray WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones (Black), which is B&H # AUWHF158.

Q: 6. Will this fit the Neumann U87 and TML103?

A: This mount should fit the U87 and the TLM 103.

Q: 7. Will it fit a Neumann TLM 193?

A: This will not work with the Neumann TLM 193.

Q: 8. Will this fit the AT 2020?

A: The Auray SHM-SCM1 is compatible with the AT2020 microphone.

Q: 9. Will this fit to Se Electronix x1s mic?

A: Yes, the Auray WCF-UB440 windscreen will fit on the sE Electronics X1 S mic.

Q: 10. Hello, would this fit to a Neumann 89i respectively over the Neumann WS89? Alternatively do Rycote 45/100 Foam and Neumann WS89 have the same dimensions?

A: Yes, the Rycote Windjammer for 45/100 Foam for Large Diaphragm Condenser should, in theory, fit over the Neumann WS89 Foam Windscreen for U89. The Rycote 45/100 and Neumann WS89 appear quite similar in size.