Created to address the needs of tactical shooters, the Bright & Tough Night Sight for Glock Large Frame from Trijicon features green tritium lamps with protective and light-shaping sapphire jewels. The lamps do not require batteries to provide illumination for the sight in low-light conditions. The lamps are encapsulated by aluminum cylinders that protect them from abrasions and shock. The metal housing features silicone cushions to offer recoil-resistant performance.

Tritium Phosphor Lamps    Scratch-Resistant Sapphire Jewels    Protective Aluminum Cylinders    Silicone Rubber Cushions    Durable Metal Body

Glock 20/21/29/30/36/40/41/S/SF

Related Questions and Answers

Q: 1. How would I attach my own filter to this? Is that what this is for?

A: The DZOFilm Magnetic Base for Koop Rear Filter is a spare ring that works only with the DZOFilm Koop Rear Filter Kit for Vespid / Catta Ace PL-Mount Lenses.

Q: 2. What's the connector on the left and right side? Is there a schematic? Is there a counter piece to mount other equipment onto?

A: The connectors on the left and right sides of the ORCA Large Front Accessories Pouch for OR-330/30/272 are for attaching pouches to hold wireless receivers. For example, you can attach the ORCA OR-38 Small Receiver Pouch (B&H # OROR38) or the ORCA OR-39 Double Wireless Pouch (B&H # OROR39).

Q: 3. 16 3/4" dimension is how much it extends outward from rack ?

A: 16-3/4" is the width of the surface area for the Atlas Sound VTD1-61 Versatile Sliding Shelf and Tray. The shelf slides out and extends 17" outside of the cabinet rails. It mounts in 19" wide cabinets that are 18-1/2" to 25-1/2" deep and equipped with front and rear mounting rails.

Q: 4. Will this work with the Tiffen 138mm Variable ND for Matte Boxes? (Product Number BH #TI138VNDMBM)

A: The Bright Tangerine Black Hole Mini Rubber Donut for Matte Boxes with 114mm Rear Opening (B&H# BRB12501077) is a rubber donut that is not designed to accept the insertion of any filters into it. That includes the VND filter in the Tiffen 138mm Variable ND in Matte Box-Mountable Rubber Donut for 143mm Openings (B&H# TI138VNDMBM). While it may be possible on a DIY basis to disassemble the parts and engineer a means by which to connect them, we cannot recommend nor endorse doing so. Just for the sake of clarity, the Tiffen 138mm Variable ND in Matte Box-Mountable Rubber Donut for 143mm Openings (B&H# TI138VNDMBM) includes both the rubber donut and the Tiffen ND filter within it. It is a one-piece unit that is designed as a replacement rubber donut for the rubber donut that would normally go with certain compatible matte boxes. (Please see the compatibility list at the end of the Tiffen product's Overview section.) As such, the VND incorporated into the Tifffen product is not designed to be removed and then installed in another donut such as the Bright Tangerine Black Hole Mini Rubber Donut for Matte Boxes with 114mm Rear Opening (B&H# BRB12501077).

Q: 5. what rack depth can this be installed in ?

A: The Atlas Sound VTD1-61 Versatile Sliding Shelf and Tray can be installed in 19" wide cabinets that are 18-1/2" to 25-1/2" deep and equipped with front and rear mounting rails.

Q: 6. What is a Frame controler and what is it used for?

A: This VistaLINK Frame Controller Card with 3RU Rear Plate from Evertz Microsystems provides a single point of access to communicate with VistaLINK-capable modules. It handles all SNMP communications between the frame (7700FR/7800FR/350FR) and the network manager (NMS), and it serves as a gateway to individual cards in the frame.

Q: 7. Will this fit the Redrock Micro Matte Box?

A: No, the Bright Tangerine Black Hole Mini Rubber Donut for Matte Boxes with 114mm Rear Opening will not fit the Redrock Micro Matte Box.

Q: 8. Will this fit an Arri MMB-2 matte box?

A: If your MMB-2 has a 114mm opening then yes it will fit.

Q: 9. Will this work with the O Box's bellows ring?

A: Yes, the Bright Tangerine Black Hole Mini Rubber Donut will work with the O Box bellows ring.

Q: 10. Can you use this on a lens without rails? Will it hold the misfit atom on a run and gun setup?

A: We're afraid not. Rubber Donuts are designed to block out light only when a matte box is being used on a rail system. They do not provide a secure connection.