Connect a stereo to your compatible Nagra digital recorder with this 3-Pin XLR to 3 x Banana Plug Cable from Remote Audio. A male 3-Pin XLR connector inserts into your digital recorder while three male banana plug connectors output to a speaker. The cable measures 4' in total length.

For Nagra 4.2/IV-L/D    3-Pin XLR Male Connector    Three Banana Plug Connectors    4' Total Length

Related Questions and Answers

Q: 1. Will this work with Nikon D5 and D4s?

A: Yes, that is the correct cable for a Nikon 10 pin camera, including the D5 and D4s.

Q: 2. Can I use this to send tc from a Sound Devices Mixpr6 II to a Denecke JB1 syncbox (and then use the sync box to feed camera)?

A: No, the Remote Audio BNC to 1/8" (3.5mm) Timecode Cable would not work with the 3.5mm output connection on the Sound Devices MixPre-6 II Field Recorder. This cable uses a TRRS (3-ring) 3.5mm connection for compatibility with smart phones and similar device connections. The CAMVATE Right-Angle BNC to Right-Angle 3.5mm Mini Jack Timecode Cable (BH #CAC2385) is a suitable alternative for the described application: https://bhpho.to/3RYR5NA

Q: 3. Can I use this with a Zaxcom ERX?

A: The Remote Audio CATCIPBNC Timecode Cable is an input cable designed for use with Apple iDevices such as the iPhone, iPod, and iPad. For the Zaxcom ERX, you may use the Remote Audio CATC1/8BNC (B&H #RECATC18BNC).

Q: 4. I have had not issue with the Vello Remote Wired Shutter Release. However I can not get it to work at all with the 10' extension option. I can see no clear Alignment marks and I agree it's probably something this simple But I've tried everything I can, included Seating and reseating the cable. Is there a alignment mark Im missing?

A: There are 3 notches in the fitting that need to be aligned for proper seating. Once aligned everything should work flawlessly.

Q: 5. Will this work with 'old' Canon 60 T3?

A: This will not work in place of the 60 T3 cable. It has a different port than the newer cameras.

Q: 6. Can you link two or more of these together?

A: The Vello 10' Remote Shutter Extension Cable for Nikon 10-Pin Connection has not been tested when linked with 2 or more extension cords. However if more range is needed, a wireless remote such as this Vello Micro would cover up to 328 feet: https://bhpho.to/2qRcBtr

Q: 7. What battery does it take?

A: The Battery The unit uses an A23 battery which is located in the Sender. The positive end of the battery should be pointed inwards, away from the cap Twist the cap to turn the unit on or off.

Q: 8. Will this work on a Nikon D810 with PocketWizard III?

A: Yes, that's the correct cable. Using a Plus III as a transmitter and either a Plus IV or Plus III as a receiver, pressing the test button on the transmitting radio will give you half press/pre triggering on your remote camera. If you would like to have the remote camera constantly pre triggered, you can add the PTMM adapter.

Q: 9. could i use this with the nikon d5?

A: used the cable to extend a old hand held remote I had for my D2x. It worked great a good price for what it was needed for.

Q: 10. Would this cable work for video between a DVR and camera?

A: Not at all: The Remote Audio BNC to 1/8 (3.5mm) Timecode Cable is a 3' (0.91m) input cable designed for use with Apple iDevices such as the iPhone, iPod, and iPad. It consists of a BNC male connector on one end and a 1/8 (3.5mm), 4-conductor iDevice plug on the other.