This 95mm MRC Nano Master #806 ND Filter from B+W is a precision-crafted neutral density filter that reduces an exposure by 6 stops for finer control over exposure settings. By increasing the density evenly across the entire image area, the depth of field can be reduced to help isolate the image subject, even in brightly lit conditions. In addition, the shutter speed can be reduced to increase image blur and enhance the sense of movement, or smooth out the look of rushing water.

All filters of the new Master filter line are equipped with the exclusive Multi-Resistant Coating (MRC) nano premium coating technology. This high-quality broadband coating is applied on both sides and enhances the optical imaging properties, allowing uniform and increased transmittance across the entire light spectrum to be achieved, with minimal physically induced remaining reflection. The nano all-around protection on the filter glass also ensures increased scratch resistance and extremely fast, easy cleaning, providing a long filter life. The slim filter ring design is compatible with wide-angle lenses with an equivalent width of a 17mm full-frame lens. The top knurling is redesigned for enhanced gripping.

Optical Density 1.8    MRC Nano Coating    SCHOTT Optical Glass    Brass Ring with Enhanced Top Knurling    Darkens Entire Image Area    Allows Reduced Shutter Speed    Plastic-Free Packaging

Related Questions and Answers

Q: 1. The specs for the B+W 95mm Xs-Pro ND Vario filter show that the front filter size is also 95mm. However, for all other sizes the front filter size is larger than the back side that screws on to the lens. Can someone please confirm that the front threads for the 95mm model are also 95mm as in the specs or wider like the picture suggests? Thanks.

A: definitely not!! the rear thread of the filter is 95mm, however the front thread of the filter is 105mm

Q: 2. Hi. Can this filter be used on a Leica 50mm APO-Summicron-M ASPH f/2.0 lens? Thank you.

A: The lens has a 39mm filter thread. This filter would not be compatible. B+W makes the same filter in 52mm. If you use a 39-52mm step up ring, then you will be able to use this filter on the Leica lens.Here is the step up ring: http://bhpho.to/1u0UKvfHere is the filter: http://bhpho.to/1qoJGa9

Q: 3. Does the front filter thread rotate when changing ND Amount? Looking to add a step up ring and go to a matte box.

A: Yes, the front threads on this filter are a 86mm size.

Q: 4. will this filter vignette with the Canon EF 16-35mm F4L lens?

A: I'm a Nikon shooter, so my answer is in that context. I no longer have my Nikkor 17-35, so the best other lens I could test it on is my Nikkor 12-24, which is a DX lens (also a 77mm diameter). Yours, however, is an FX lens, so I don't know how that may affect the comparison. I tested it on the D800, in full format mode. I noticed the beginning of vignetting when the focal length was 19mm. I did it a few times, and that was consistent.So, if this is in any way accurate, you can probably expect to lose a few mm of focal length at the3 wide end when you use this filter. I don't know if this filter is made in a thinner version for wide angle use. Hope this helped.

Q: 5. Does this filter work with an M.Zuiko Olympus F2.8 Pro 12-40mm?And would a step down ring 52-62mm cause vignetting?

A: It will work with that lens. If your using a 52-62mm step up ring from a smaller lens you will be ok. If your using a step down to put a 52mm filter on a 62mm lens then you will most likely have vignetting.

Q: 6. Hi i plan to use this filter on Nikon 28mm f/1.8G AF-S Nikkor mount on Nikon D700. Any concern?This is an expensive filter so just want to be sure before purchase.Thanks!

A: They are 100% compatible and will work well together.

Q: 7. Does this filter have hard stops?

A: So as not to confuse with my prior answer, there are no intermediate stops but yes there are stops at each end.

Q: 8. Will this fit Zeiss Batis 67mm lens with the hood ON?

A: I would say most likely no as I cannot use a hood with any of my lenses when using this filter.

Q: 9. Can I mount this filter on my zeiss planar f 1.4 50 mm ?

A: If you own the Zeiss Planar T* 50mm F/1.4 ZF.2 Lens, B&H # ZE5014ZF2N, which has 58mm filter threads, yes, the B+W 58mm XS-Pro Digital ND Vario MRC nano Filter would be compatible for use with your lens.

Q: 10. is the 67mm version front threaded? what's the size? want to fit my lens cap

A: It is front threaded. The front thread is 72 mm. The front thread is written under the Specs tab in the section that says Front Accessory Thread.