The 6” Lemo EDW to Duplex LC Fiber & 6-Pin Reverse Gender Chassis Mount Inline Breakout Cable from Camplex is an internal distribution breakout cable for panel mounting in blank panels or as a replacement in hybrid devices. It is a pre-terminated SMPTE hybrid breakout cable with a LEMO 3K.93C connector feeding out to both duplex LC optical connectors and a reverse gender, chassis mount 6-Pin AMP connector for power. This cable is suitable for use in SMPTE rack panels, splice trays, adapters, and wall boxes. This breakout series cable is UPC machine polished to meet or exceed all SMPTE 304M/311M standards.

This composite cable integrates the control line and optical fiber for video and audio transmission. The cable is standardized by SMPTE for HDTV Broadcast camera use. It consists of 2 single-mode optical fibers, four 20 AWG, and two 24 AWG tinned copper conductors cabled around a steel strength element, with an overall tinned copper braid. This general purpose cable is used for studios, patching, and light to medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Assembled with SMPTE cable & LEMO and Senko connectors

Industry standard cable

Terminations by LEMO trained technicians

Electrical assemblies 100% tested for continuity and short circuits

Fiber optic assemblies 100% tested for attenuation and back reflection

SMPTE 311M and 304M compliant

Stainless steel assemblies

Rubber dust caps

19.4 Mb/s to 3 Gb/s transport rate

Machine polished fiber contacts

Low insertion and return loss

Related Questions and Answers

Q: 1. Does this work with alexa mini?

A: Yes it will.

Q: 2. Can this power Teradek or SmallHD from the 2-pin 12v on the Alexa 35 camera? I've heard polarity of cables vary by brand.

A: When using the 2-pin 12v power output on the ARRI Alexa 35 camera, it can power devices with 2A of power. It would depend specifically which Teradek or SmallHD unit would need to be powered, as some require more capacity, however, the Tilta 2-Pin to 2-Pin LEMO Cable (23-), would be appropriate for 12v 2A devices.

Q: 3. Is this cable shielded?

A: The Tilta 2-Pin LEMO-Type to 3-Pin Fischer-Type Cable is not a shielded cable.

Q: 4. Has anyone used this for AUdio? I have a 5pin lemo audio out on my camera and would like to connect this to my stereo mini jack

A: This cable, as stated, is designed for Timecode. HOWEVER, if the connections inside cable and inside your camera are wired the same, it may work.Its impossible to tell without knowing the camera wiring of its connector. I would contact your camera manufacturer.

Q: 5. How long is this cable?

A: The manufacturer does not specify this information and since this is a brand new item, which we currently do not stock yet, we have no possibility of physically verifying this at this time.

Q: 6. How long is the cable? Do they make one that is 4' or longer?

A: This cable is only 18 in length. There are longer cables however, such as the Laird Digital Cinema 4-Pin Lemo to 4-Pin XLR Power Cable for Teradek Cubes (6'/1.83 m)

Q: 7. Will this breakout cable work with the Atomos Assassin?

A: Hi,This Audio break out is just for the Shogun range of Products. The Ninja Assassin only has a line live 3.5mm Jack in put.

Q: 8. Is this male to male?

A: Yes, this is a Tilta 2-Pin to 2-Pin LEMO Cable (23") male to male.

Q: 9. this cable work with sound devices 633?

A: This will jam the sound devices 633 from the tentacle however it will not jam the tentacle from the 633 as it is only single direction

Q: 10. Does this work with Teradek Bolt?

A: The 2-pin LEMO works, but it's all contingent on where you are connecting it to and making sure that proper voltage is being sent through to avoid damage.