The small MoneyMaker 2-Camera Harness without D-Rings in Bridle black from HoldFast Gear is made from U.S. native steer hides, with safety straps for ultimate security. The versatile design makes this an essential tool for the modern photographer.

Secure your cameras and important gear where it's most accessible and comfortable; right on you. The bottom side of the strap has a suede-like feel, and will shed a little at first use. This stops very quickly, and running your hand down the length of the strap will knock away loose shavings. The bottom side is also colorless as to not bleed onto your clothing.

HoldFast Gear uses real full grain leathers and each strap will display the unique life that the animal lived. You may see scars from brands, barbed-wire cuts, stretch marks, insect bites, marks from birthing, and natural creases in the surface of your strap.

Holds 1 or 2 Cameras    Made from U.S. Native Steer Hides    Hardware is Rust Resistant    Holds Other Items/Accessories

The MoneyMaker is 1.5" wide.

Fit is based on height and broadness. The ideal carrying position of the MoneyMaker is for the strap to fall about 4-5" below your armpit so the cameras stay high on your body.

Small: Height of 5'7" and below (if you are broad/built size up)

Medium: Height between 5'8"-6'2"  (if you are slender size down, broad or built size up)

Large: Height of 6'3" and above OR wear extra-large clothing (if you are slender size down)

Optimum fit will ensure the most comfort long term. If the MoneyMaker is worn too loose it causes the cameras to swing and sway too much, which puts pressure on your lower back and causes the straps to move and slip more. When worn properly, the MoneyMaker will be anchored to your body and help correct poor shooting posture by pulling your shoulders upright and back, keeping you and your cameras in line. When the main straps are around 4" below the arm pit area, this will typically place the clip that attaches to the camera right around your waistline. There should be a good amount of arm bend when your hand is on the camera at resting position.

Related Questions and Answers

Q: 1. Does the included Two 1/4"-20 HoldFast Accessory Clips work for attaching the quick release plates of most cameras for tripod mounting or do I have to order the HoldFast Gear's The Camera Holdfast Accessory Clip (Quick Release Plate Compatible) B&H # HOCHF02QRP MFR # CHF02-QRP for the price of $33.99 each for two cameras for a two-camera harness?

A: You will need to purchase the quick release clips separately as they do not come with the harness.

Q: 2. Hello I have a question it si possible to remove the straps an from of the harness money maker 3 gear?

A: It is not possible to dissemble these straps. This adds to your piece mind knowing it will not fall apart on you.

Q: 3. Is HoldFast Gear The Camera Holdfast Accessory Clip (Quick Release Plate Compatible) included with the Money Maker original?

A: Yes, it comes with 2 clips as stated in whats in the box; In the Box HoldFast Gear Money Maker 2-Camera Buffalo Leather Harness (Tan, Small) 2 x HoldFast Gear The Camera Holdfast Accessory Clip 2 x Camera Leash Limited Lifetime Warranty

Q: 4. Does this model of the Money Maker have the new slide mechanism like on Holdfast's website? Or is it the older round sliders?

A: Yes this model has the most current slide mechanism.

Q: 5. I am 6'2.5 inches tall using two Sony A7 camera's. One will carry the 24- 70 mm the other a 85mm Batis or a 50mm 1.1 Voightlander. y camera's are heavy with these lenses, and I need a secure attachment for crowds in foriegn locations on shoots. ( no snatch and go ). How would the Portrait Extensions work? Will the Large work with my camera's and my height ? I am medium build.

A: The large would be just fine for you. I'm 6 4 and with my Canon 5DIII and the 70-200 it comes to my waist line. Their are straps to adjust for height if it's to long.

Q: 6. How well does the HoldFast Gear Money Maker "Two" Camera Harness do when holding only one camera? Does this harness require always carrying both cameras for proper balance or can you also use it comfortably with only one camera attached?

A: The Holdfast double harness manufacturer says it will work with one camera as well as two. The weight of the single camera is a factor.

Q: 7. What is the difference between the $179 vs $230?

A: Hi--the $230 item has black hardware, while the $179 item has silver hardware.

Q: 8. Is this the new version of the strap or the old version?

A: It is the old version and has since been discontinued in favor of the updated one.

Q: 9. His do you have the buffalo leather holdfast harness in a burgundy ? That’s for the water buffalo leather

A: I'm sorry, no, we don't have this model in burgundy.

Q: 10. How easy is it to take the camera off the clip?

A: I find it's a two handed job that I prefer to do sitting, just in case the camera slips out of my hand. Not incredibly difficult though. But definitely secure enough to keep your cameras on there with the main clip and the safety fabric loop. I usually take my camera off for family formals during a wedding, and when we're sitting down to eat, but other than that I keep them on.