Certified safe for use in hazardous locations where explosive gases and dusts may be present, the Nightstick XPP-5422GMXA Intrinsically Safe Dual-Light Flashlight offers spot, flood, and dual-beam functionality with a peak output of 285 lumens. Its engineered polymer body is IP67-rated waterproof and submersible to 3.3', and carries a 6.6' impact-resistance rating. The light is controlled by two push-button switches just below the head, one for the spot beam and one for the flood, and you have a choice of momentary or constant-on activation. The XPP-5422GMXA is cETLus, ATEX Zone 0, IECEx, and InMetro certified safe.

cETLus, ATEX Zone 0, IECEx, InMetro Safe    Peak Output 285 Lumens    Spot, Flood & Dual Beams    Clip and Tail Magnets    Dual Push-Button Body Switches    Momentary and Constant-On Activation    Lightweight Polymer Body    Impact & Chemical Resistant    IP67-Rated, Dustproof and Submersible    Runs on Three User-Supplied AA Batteries

• 210-lumen spot beam
• 130-lumen downward-facing flood beam
• 285-lumen dual beam
• Cree LED and deep parabolic reflector for long throw

• Type: push button
• Location: handle
• Momentary and constant-on activation

• cETLus, ATEX Zone 0, IECEx, and InMetro listed Intrinsically Safe
• Engineered polymer nylon housing is impact and chemical resistant
• IP67-rated to be dust-proof and submersible to 3.3'
• Impact resistant to 6.6'
• Magnets in tail and belt/pocket clip provide many options for hands-free placement

Related Questions and Answers

Q: 1. Is the cable that comes with the Super Shield? I need a replacement.

A: Yes, this is the short XLR cable that comes with the Rycote modular blimp kits.

Q: 2. Why can’t I buy a plate exactly like the one that came with my Capture Clip V3? I need that 4 way plate for other cameras. The V2 plate is too big and only 2 way.

A: You can get the standard plate, click the link below to view; https://bhpho.to/2WCXF28

Q: 3. Hi. Do you have to remove the Peak Design anchor connector before inserting the plate in a RC2 base, or it does not interfere when inserting and locking the plate?

A: On most RC2 heads you need to remove the anchor to place the plate on the tripod head.

Q: 4. Does this work with the Peak Design Capture V3?

A: Yes however it's not gonna have the same function as the normal clip. You can only clip in two directions not all four like with the original plate. For me I use the clips on my backpacks so I only carry it vertically.

Q: 5. Will this fit the GEEKOTO AT24Pro Dreamer 77" Aluminum Tripod?And a Nikon D7500 with a Sigma 100-400mm lens?

A: Yes this can fit a GEEKOTO AT24 Pro Dreamer Tripod which has an Arca type clamp on top.

Q: 6. Hi! Does this work with a Manfrotto Compact advance tripod ? Thanks!

A: Yes, the Peak Design Dual Plate v2 works with RC2 systems, such as the one used with the Manfrotto Compact Advanced Tripod.

Q: 7. I own a Manfrotto befree advance travel tripod with 494 ball head and use 200 PL-Pro plate, will this PD dual plate work? I am planning to use it along with the v3 clip on my LowPro Flipside Trek backpack.

A: Yes, the Peak Design Dual Plate v2 for Capture Camera Clip would be compatible for use with the Manfrotto 494 Center Ball Head with 200PL-PRO Quick Release Plate.

Q: 8. Wil this work with a Benro B2 head ?

A: Yes. The Peak Design Dual Plate (V2) is compatible with arca-swiss style heads like the Benro B2, as well as Manfrotto-RC2 style heads.

Q: 9. Can this be used over a phone case? Or does the phone need to be taken out of its' case?

A: According to the manufacturer, it is advised to use the Vlog Light on a Cell Phone without a Case as the grip is not able to support a thicker case.

Q: 10. Hello I have two questions #1 I would like to know what's the difference between the two camera plates I see one that looks much smaller maybe that's the first version? and I see another one that it says on it version 2 and it's much bigger so I would like to know what's the difference? Please let me know on that and #2 question would the second plate I think that's a new version but please let me know on that but I will probably purchase the version2 would it work the second version? with the Manfrotto MVMXPRO500US XPRO Aluminum Video Monopod ??? Please let me know looking forward to hearing from you guys all the best!

A: All info on the difference between our plates here: a href= https://support.peakdesign.com/hc/en-us/articles/201291383-What-s-the-difference-between-Capture-s-plates-kits- target= _blank https://support.peakdesign.com/hc/en-us/articles/201291383-What-s-the-difference-between-Capture-s-plates-kits-/aFor the Manfrotto Video Monopod, that would not be directly compatible with any of our plates. Though can see help on other options here: a href= https://support.peakdesign.com/hc/en-us/articles/202329558-Making-Your-Tripod-Compatible-with-Peak-Design-Products- target= _blank https://support.peakdesign.com/hc/en-us/articles/202329558-Making-Your-Tripod-Compatible-with-Peak-Design-Products-/a