Add a high-quality, multifunction PTZ camera to your conference room, event space, education environment, or house of worship with the silver Universal HDMI/SDI/USB Live Streaming PTZ Camera with 12x Zoom from BZB Gear. The camera features a 1/2.8" CMOS sensor and outputs up to 1080p video over HDMI, SDI, USB 3.0, or uses RSMP/RTSP protocols to stream video and audio to the Internet.

The camera supports uncompressed video transmission over MJPEG, H.265, and H.264 compression formats. When connected to the Internet, this IP camera allows you to control PTZ actions and monitor the surveillance area from a remote location via a Web browser. This provides you with several advantages like reduced integration costs, easy remote production and engineering, and lower cost for multiple location systems. You can also manage the unit via IP using ONVIF or by using its RS-232 or RS-485 serial ports with a separately available serial PTZ controller, and the RS-232 serial ports support cascading. You can power the camera with the included power adapter, or you can utilize your existing PoE (Power-over-Ethernet) LAN to save cable runs.

Equipped with a 12x optical zoom, this PTZ camera enables you to zoom in on activity in the monitoring area for a closer look, and it has a wide field of view for capturing large meeting rooms. It features an RJ45 Ethernet output that can transmit up to 1080p video to any RTSP/RTMP streaming network so you can broadcast live directly to internet streaming sites. The camera also supports 3.5mm stereo audio input, allowing you to capture and embed AAC, MP3, or PCM audio with the video signal.

3 x SDI/HDMI PTZ Cameras, 12x Zoom    6-Channel Video Switcher/Mixer    8-Port 1G Ethernet PoE+ Switch    IP/Serial PTZ Controller with Joystick

Remote learning, lectures, webcasting, video conferencing, remote training, remote medicine, interrogation, and emergency command systems

Supports H.264/H.265 video compression with resolutions up to 1920x1080p60 and 2-channel AAC, MP3, and PCM audio compression

High-Quality 1/2.8" CMOS sensor captures resolutions up to 1920 x 1080p60

Autofocus algorithm ensures a smooth adjusting lens, accuracy, and stable auto-focusing

Low-noise CMOS ensures high SNR of camera video

Further reduce noise while ensuring image sharpness

An adaptive, high-accuracy, step-driving motor mechanism provides extremely quiet and smooth operation to designated positions

HDMI, 3G-SDI, wired LAN streaming output

Control using IR remote, IP via a web GUI, and RS232/RS485 serial

ONVIF, RTSP, RTMP protocols and RTMP push mode to a streaming media server (Wowza, FMS)

Supports low-power sleep/wake up; the consumption is lower than 500mW in sleep mode

VISCA, VISCA-over-IP, Pelco-D, and Pelco-P protocols are automatically recognizable

RS-232 cascade function for convenient installation of multiple units

Support for up to 255 presets and 10 presets by IR remote

3.5mm stereo line input supports 16, 32, 44.1, 48 kHz sampling frequency and AAC, MP3, PCM audio encoding

Power the camera using the included power adapter or utilize PoE (Power-over-Ethernet)

Related Questions and Answers

Q: 1. 1) Would I be able to RTMP stream to YouTube (etc) and transmit NDI/HX over my 10 GbE network? 2) Is there any additional licensing cost to using NDI/HX out of the box? Thanks, this looks perfect for our needs.

A: 1) This camcorder can only stream via 1 protocol at a time. What most customers do when using a camera like this is they use NDI to send the video to their switcher across a local network and then the switcher is in charge of streaming out to YouTube via RTMP. (switcher can either be hardware like a NewTek Tricaster or software such as Vmix, Wirecast, or OBS) 2) there is no additional licensing cost for accessing NDI. I hope it works out for you!

Q: 2. Is it compatible with Canon CR-N500?

A: If the Camera you select has NDI NDI|HX2|HX3 the PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher and PTZ Controller should support control of the camera. However, this has not been tested by PTZcam at this time. The Canon CR-N500 does have NDI support though.

Q: 3. Is the NDI license included or does it have to be purchased separately?

A: The BZBGEAR Live Streaming 4K NDI PTZ Camera with Tally Lights & 12x Optical Zoom (White) has NDI included.

Q: 4. Does this have chroma capabilities?

A: The PTZCam Switch N8 does not have a built in chromakey. However you can overlay logo graphics.

Q: 5. Do these cameras have tally lights? If so, how do they connect?

A: No, the cameras in the BZBGear 3 x 30x PTZ Camera Broadcast Kit with 6-Channel Mixer, 8-Port Switch & Controller (White) do not have tally lights. You could get the Cerevo FlexTally Wireless Tally Lamp System to add Tally lights to each camera. See: https://www.bhphotovideo.com/c/product/1475719-REG/cerevo_cdp_ft01b_flextally_wireless_tally_system.html

Q: 6. Hi, this works for the OBSBOT Tail AIR?

A: According to OBSBOT the OBSBOT Tail Air AI-Powered PTZ Streaming Camera, BH #OBOWBTAAIPTZ, does work with VISCA controls over LAN. The BZBGEAR Universal Compact Serial and IP PTZ Camera Joystick Controller does offer VISCA over LAN, meaning they should be compatible.

Q: 7. Can this be connected to an external SSD for recording?

A: The BirdDog X1 Ultra PTZ Camera with 12x Zoom (White) does not support recording directly to an SSD.

Q: 8. Is this compatible with NDI'HX2 and/or NDI'HX3 cameras?

A: At this moment the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller supports only NDI/HX2 cameras.

Q: 9. it's possible to have the tally function through the ndi cable when using panasonic or sony ptz ?

A: Yes, it is possible to use the PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher to control Tally and the camera though NDI. However, this depends on the camera model. The camera must have NDI HX3, or NDI HX3 support. Many older cameras only support NDI HX ( NDI HX1)

Q: 10. Is it compatible with Datavideo ptc-140 ndi/hx?

A: Because the Datavideo PTC-140NDI SDI/HDMI/NDI PTZ Camera with 20x Optical Zoom does not have NDI|HX2 or NDI|HX3, the PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher and PTZ Controller is not compatible.